Menu Products
5-Axis Vertical Machining Center Vcenter-AX800

Vertical Five-Axis Machining Center

Vcenter-AX800 (5-axis machining)

    With the rotary table built next to the fixed table, this innovative model Vcenter-AX800 5 axis vertical machining center is equipped with a swivel head on the traveling column to implement 5-axis machining on large part (diameter up to 1000mm). Roller-cam-drive® mechanism for both rotary axes ensures sufficient rigidity for 4+1 axis heavy machining, and high rotation speed helps shorten overall cycle time compared as conventional worm gear mechanism.


  • Swivel head (B-axis) and rotary table (C-axis) facilitate 5-axis machining of large parts, up to 1000mm in diameter.
  • C-axis table is clamped at high torque 3433 Nm for heavy cutting.
  • The B-axis swivel head includes a Hirth coupling with 1°
    increm ent further enhancing the rigidity, and 4+1 axis machining capability.
  • BBT-40 spindle 15000rpm (22kW)
Vcenter-AX800 5 Axis Vertical Mill
Item   Units Vcenter-AX800 Vcenter-AX800II
Travel X axis travel mm 1600 1600
Y axis travel mm 700 700
Z axis travel mm 600 (vertical milling)
1000 (horizontal milling)
400 (vertical milling)
740 (horizontal milling)
Distance Spindle center to column mm 190 ~ 890 190 ~ 890
Spindle nose to table surface mm 50 ~ 650 50 ~ 450
Spindle center line to table surface mm 0 ~ 1000 0 ~ 740
Height from table surface to floor mm 930 1130
Table Table work area mm 1250 x Ø800 Ø800
Dimension of T-slot mm 7 x 18H7 x 100 7 x 18H7 x 100
Max. table load (rotary) kg 1200 1200
Max. table load (fixed + rotary) kg 2400 -
Spindle Spindle taper   BT-40 BBT-40
Spindle motor – cont./30/10min kW 15/18.5/22 15/18.5/22
Spindle speed rpm 15000 15000
Linear axis feed Rapid feed rate - X/Y/Z m/min 30 / 30 / 30 30 / 30 / 30
Axis feed motor - X/Y/Z kW 9 / 7 / 9  9 / 7 / 9
Cutting feedrate by table m/min 10 (opt. 15, 30) 10 (opt. 15, 30)
Linear guide width (X/Y/Z) mm 45 / 55 / 55 45 / 55 / 55
Ballscrew dia x pitch (X/Y/Z) mm Ø55x12(X) /
Ø45x12(Y) /
Ø50x12(Z)
Ø55x12(X) /
Ø45x12(Y) /
Ø50x12(Z)
Rotary feed rate Tilting (swivel) / rotary angles deg. -30 ~ 110 / 360 -110 ~ 30 / 360
Rotary rapid feed rate - A/C or B/C rpm 20 / 25 (B/C) 20 / 25 (B/C)
Axis feed motor - A/C or B/C kW 4 / 4 (B/C)  4 / 4 (B/C)
Continuous indexing resolution deg 0.001 (roller cam drive) 0.001 (roller cam drive)
Continuous torque output - A/C or B/C N-m 1580 / 2640 (B/C) 1580 / 2640 (B/C)
Braked torque (clamping) - A/C or B/C N-m 1710 (1˚ by coupling), 960 / 3433 (by brake, B/C) 1710 (1˚ by coupling),
960 / 3433 (by brake, B/C)
Tools Max. tool length mm 300 300
Max. tool weight kg 7 7
Magazine capacity   40 (opt. 60) 40 (opt. 60)
Max. tool diameter (without adjacent tools) mm 76 (125) 76 (125)
Tool exchange time sec. 2.8 (T-T), 7.7 (C-C) 2.8 (T-T), 7.7 (C-C)
Pull stud angle deg. 15 (JIS 40P) 15 (JIS 40P)
Tool selection method   Random Random
Machine Power requirement kVA 44 (excl. CTS) Fanuc
64 (excl. CTS) Heidenhain
44 (excl. CTS) Fanuc
64 (excl. CTS) Heidenhain
Min/Max. air pressure kg/cm2 5.5 ~ 6.5 5.5 ~ 6.5
Coolant tank capacity L. 450 450
Std. NC controller   0i-MF (10.4”) 0i-MF (10.4”)
Floor space requirement (with conveyor) mm 5575 x 4321 5575 x 4621
Max. machine height mm 3433 3433
Machine weight kg 15500 16000