Menu Products
Horizontal Turning Lathes Vturn-S26

Horizontal Turning Center

Vturn-S26

Despite its nimble and productive performance, the new Vturn-S26 offers a massive spindle output of 22kW with 574Nm which permits heavy duty cutting under the most challenging conditions and materials. The Vturn–S26 has a swing of 600mm compared to the 520mm on previous Vturn-26HD models and this increases the maximum turning diameter from 410 to 430mm.


The Vturn–S26 has a swing of 600mm compared to the 520mm on previous Vturn-26HD models and this increases the maximum turning diameter from 410 to 430mm.


  • One piece 30° slant bed
  • Z-axis travel 610/1090 mm
  • 10” Power chuck
  • Z-axis travel 610 mm
  • High thrust force 1441 Nm
  • High rapid feed 18/24 m/min (X/Z)
  • C-axis available
MODEL Vturn-S26/60 (CM) Vturn-S26/110 (CM)
Capacity Swing over bed dia. mm Ø600 Ø600
Standard turning dia. mm Ø350 (Ø285) Ø350 (Ø285)
Maximum turning dia. mm Ø430 (Ø420) Ø430 (Ø420)
Swing over carriage dia. mm Ø480 Ø480
Between centers mm 640 1130
Bar capacity (Hole thru draw bar) mm Ø75 (opt.77, 91) Ø75 (opt.77, 91)
AXIS FEEDS X axis travel mm 215+25 (210+30) 215+25 (210+30)
Z axis travel mm 610 1100
Rapid feed - X / Z axis m/min 18 / 24 18 / 24
Feed motor - X / Z axis kW 4 / 4 4 / 4
JOG feed mm/min X/Z: 0~1260  X/Z: 0~1260 
Ball screw dia x pitch mm Ø32×P6 (X), Ø40×P8 (Z) Ø32×P6 (X), Ø40×P8 (Z)
Spindle Spindle speed rpm 3500 (opt. 2500) 3500 (opt. 2500)
Spindle nose (chuck) inch A2-8 (10”) A2-8 (10”)
Spindle motor power (cont./30min/25%) kW 15 / 18.5 / 22
(opt. 18.5 / 22 / 26)
15 / 18.5 / 22
(opt. 18.5 / 22 / 26)
Spindle bearing inside dia. mm Ø130 Ø130
Spindle taper   1/20 1/20
Turret No. of tools (live)   10 (12) servo 10 (12) servo
Tool shank size mm □25 □25
Max. boring bar dia. mm Ø50 (BMT-65) Ø50 (BMT-65)
Exchange time (T-T) sec 0.8 (0.81) - adjacent
1.0 (1,25) - opposite
0.8 (0.81) - adjacent
1.0 (1,25) - opposite
Milling speed rpm 4000 (opt. 6000) 4000 (opt. 6000)
Milling motor kW 4.5 4.5
Tailstock Tailstock quill dia. mm Ø110 Ø110
Quill stroke mm 100 100
Quill taper   MT #5 (opt. MT#4) MT #5 (opt. MT#4)
Machine NC controller Fanuc 0i-TF (8.4”) 0i-TF (8.4”)
Coolant tank capacity L 330 380
Power requirement kVA 27 (29) 27 (29)
Machine dimension LxWxH
(with chip conveyor)
mm 4017 x 1848 x 1819 4673 x 1848 x 1819
Net weight kgs 6130 (6230)  6730 (6830) 
※Machine and controller specifications are subject to change without notice.

Standard accessories

  • Fanuc 0i-TF(8.4”) with Manual Guide 0i
  • Hydraulic chuck with soft jaws
  • Programmable tailstock
  • Chip conveyor
  • Fully enclosed splash guarding
  • Hand wheel
  • Tool holders (for standard turret only)
  • Coolant flush on Z-axis cover
  • 3 step warning light

Optional accessories

  • Fanuc 0i-TF(10.4”) with Manual Guide I (MGI)
  • Manual tool presetter
  • Auto tool presetter
  • Parts catcher (swing type)
  • KITAGAWA® power chuck
  • Air conditioner for electrical cabinet (Panel cooler)
  • 12” chuck (3000rpm spindle)
  • Higher pressure coolants
  • Bar feeder interface
  • Air blow
  • Oil skimmer
  • Oil mist collector
  • Auto door
  • Hard jaws
  • Tailstock center
  • Transformer
  • C-axis (Vturn-S26CM)