Menu Products
Horizontal Turning Lathes Vturn-A200

Horizontal Turning Center

Vturn-A200

  • One piece 30˚ slant bed
  • Large swing diameter 720 mm
  • 8" Power chuck / 4200 rpm
  • Z-axis travel 600 mm
  • High thrust force 1583 Nm
  • High rapid feed 24/24 m/min (X/Z)
  • Shortened belt driven spindle
  • Digital tailstock
  • Rotary operation panel
Item  \  Model   Vturn-A200 (SM) Vturn-A200CM (SCM)
Vturn-A200YCM (YSCM)
Capacity Swing over bed mm 830 (limited by front door) 830 (limited by front door)
Swing over carriage mm 720 720
Between centers mm 604 604
Max. turning dia. mm 390 390 (390)
Std. Turning dia. mm 320 286 (286)
Bar capacity mm 52 (opt. 66) 52 (opt. 66)
Axis Feeds X axis travel mm 195+20 (160+50) 165+50 (165+50)
Z axis travel mm 600 600
E axis travel (subspindle) mm 550 (550) 550 (550)
Y axis travel mm - ±45
Rapid feedrate m/min X/Z: 24/24 (E:15) X/Z: 24/24 Y:10 (E:15)
Feed servo motor  KW X:3, Z:4 (E:2.5) X:3, Z:4, Y:3 (E:2.5)
JOG feedrate mm/min X/Z=0~1260 X/Z=0~1260
Ballscrew dia. x pitch mm Ø32×P6 (X), Ø40×P8 (Z)
Ø40×P8 (E)
Ø32×P6 (X), Ø40×P8 (Z)
Ø32×P6 (Y), Ø40×P8 (E)
Spindle Max. spindle speed rpm 4200 (belt-driven) 4200 (belt-driven)
Opt. 5000 (built-in)
Spindle nose (chuck) Inch A2-6 (8”) A2-6 (8”)
Spindle bore Mm 62 (opt. 76) 62 (opt. 76)
Spindle motor (cont./30min) KW 7.5/9 (αiIP15) 7.5/9 (αiIP15)
opt.15/18.5 (BiI180M)
Bearing inside dia. mm 100 (opt. 120) 100 (opt. 120)
Sub-spindle
(E axis)
Max. spindle speed rpm 7000 (built-in) 7000 (built-in)
Spindle nose (chuck) inch A2-5 (5”) A2-5 (5”)
Spindle motor (cont./25%) KW 7.5/11 (Bil112S) 7.5/11 (Bil112S)
Bearing Inside dia. mm 75 75
Spindle bore mm 42 42
Bar capacity mm 30 30
Turret No. of tools no. 12 12
No. of live tools no. - 12 (DIN 1809)
Tool shank size mm 20 (opt.25) 20
Max. boring bar dia. mm 40 BMT-55
Exchange time (T-T) sec 0.3 0.3
Exchange time (including disk up & down) sec 1.04 (Adjacent)
1.45 (opposite)
1.04 (Adjacent)
1.45 (opposite)
Milling speed  rpm - 4000 (opt. 6000)
Milling motor (cont./15%) KW - 3.7/7.5 (βiI3/12000)
Tailstock Quill diameter mm N.A. (digital) N.A. (digital)
Quill taper   MT#4 MT#4
Stroke (E-axis) mm 550 550
Accuracy Positioning accuracy (bi-directional) mm 0.01 0.01
Repeatability mm ±0.004 ±0.004
Machine Coolant tank capacity L. 330 330
NC controller Fanuc 0i-TF Plus (10.4”) 0i-TF Plus (10.4”)
Power requirement KVA 21 (28) 35 (44)
L×W×H (with chip conveyor) mm 3882 x 2430 x 2056 3882 x 2430 x 2056
3882 x 2430 x 2286
Net weight        kg 6500 (6700) 6800 (7000)
※Machine and controller specifications are subject to change without notice.

Standard accessories:

  • Fanuc 0iTF Plus (10.4”, type-1) control
  • Power chuck with soft jaws
  • Programmable tailstock
  • Chip conveyor with cart
  • Fully enclosed splash guarding
  • Hand-wheel
  • Tool holders (only for standard turret)
  • Coolant flush on Z-axis cover
  • 3 step warning light
  • Fanuc e-book (CD)

Optional accessories:

  • Air conditioner for electrical cabinet
  • Manual tool presetter (Renishaw®)
  • Auto tool presetter (Renishaw®)
  • Parts catcher (swing type)
  • KITAGAWA® hydraulic chuck
  • Auto door
  • Bar feeder interface
  • Air blow system
  • Higher pressure coolants
  • Oil skimmer
  • Sub-spindle (direct drive)
  • Large spindle bore
  • Fanuc manuals
  • Hard jaws