- Genuine 60° slant bed for minimum distance from Z-axis ball screw to the tool tip so as to reduce the chip built-up.
- Built-in 4-step gearbox inside the headstock further enhances the cutting torque 536.4kg-m at low spindle speed 67 rpm.
- Spindle nose A2-11 with Kitagawa® hydraulic 15" chuck is offered as standard and available with 18"/21"/24" chucks.
- Z-axis ballscrew diameter 50mm.
- Maximum turning length 1650mm.
- Available with C-axis spindle and live tooling by German Sauter® VDI turret.
| ITEM \ MODEL | Unit | Vturn-46/165 | |
|---|---|---|---|
| MACHINE CAPACITY | Swing over bed | mm | 820 |
| Std. Turning dia. | mm | 520 | |
| Max. turning dia. | mm | 730 | |
| Swing over carriage | mm | 520 | |
| Center distance | mm | 1750 | |
| AXIS FEEDS | X axis travel : -Std turret -VDI turret -VDI turret, C-axis |
mm | 365+25 137+303 186+234 |
| Z axis travel | mm | 1650 | |
| Rapid feed - X/Z axis | m/min | 12 / 15 | |
| Feed motor - X/Z axis | kW | 3 / 4 (Opt. 3 / 7) |
|
| Cutting federate | mm/min | 0~1260 | |
| Ball screw dia x pitch | mm | 36 x P6 (X) 50 x P10 (Z) |
|
| SPINDLE | Spindle nose (chuck) | inch | A2-11 (15") |
| Max. spindle speed | rpm | 1500 | |
| Spindle motor power | kW | 30 / 37 With gearbox | |
| Bearing inside dia. | mm | 180 | |
| Spindle bore | mm | 123 | |
| Hole through draw bar | mm | 110 | |
| TURRET | No. of tools | no. | 10 (12 for CV) |
| No. of live tools | no. | 6 | |
| Tool shank size | mm | 32 | |
| Max. boring bar dia. | mm | 60 (VDI-50) | |
| Exchange time (T-T) | sec | 1 | |
| Milling speed | rpm | 2500 | |
| Milling motor | kW | 7.0 | |
| TAILSTOCK | Quill dia. | mm | 150 |
| Quill stroke | mm | 150 | |
| Quill taper | MT#5 | ||
| OTHER | CNC controller (FANUC) | 0i-TD | |
| Tank capacity | L. | 250 | |
| Power requirement | KVA | 64 | |
| Approx. machine size | m | 6.2 x 3 x 2.5 | |
| Net weight | kg | 13500 |
※Machine and controller specifications are subject to change without notice
