Menu Products
Vcenter-AX380 Vertical Machining Center

Vertical Machining Center

Vcenter-AX380 (5-axis machining)

  • Trunnion type tilting table (A+C axes) with innovative non-backlash rollercam mechanism offers excellent solution for small part machining.
  • Higher rotating speed and machining accuracy than conventional worm gear mechanism shorten cycle time.
  • Higher clamping rigidity than DD motor facilitates 4+1 axis heavy cutting.
  • BIG-PLUS BT-40 (BBT-40) spindle 12000rpm (15kW).

With an extremely rigid and tough column, the C-framed Vcenter-AX380 presents high feed rate 48 m/min and high Z-axis acceleration 0.75G to minimize spindle non-cutting time. Coupled with powerful 12000 rpm spindle and turnnion type rotary table. Vcenter-AX380 5-axis machining center effectively upgrades the cutting performance with higher accuracy and efficiency.

Item   Unit Vcenter-AX380
Travel X axis travel mm 700
Y axis travel mm 500
Z axis travel mm 540
Distance Spindle center to column
(vertical milling)
mm 547
Spindle nose to table surface
(or table center)
mm 60 ~ 600
Spindle center line to table surface
(horizontal milling)
mm -
Height from table surface
(or table center) to floor
mm 1085.5
Table Table work area mm Ø380
Dimension of T-slot mm 12H7
Max. table load (rotary) kg 200
Max. table load (fixed + rotary) kg -
Spindle Spindle taper   BBT-40
Spindle motor - cont / 30 / 10min kW 11/15/18.5 (w/t CTS)
7/11/15 (w. CTS)
Spindle speed rpm 12000 (opt. 15000)
feed rate
Rapid feed rate - X/Y/Z m/min 48 / 48 / 48
Axis feed motor - X/Y/Z kW  4 / 4 /7
Cutting feedrate by table m/min 20 (opt. 30)
Linear guide width (X/Y/Z) mm 30 / 35 / 45
Ballscrew dia x pitch (X/Y/Z) mm Ø40x16 (X/Y/Z)
feed rate
Tilting (swivel) / rotary angles deg. -120 ~ 30 / 360
Rotary rapid feed rate rpm 33.3 / 40 (A/C)
Axis feed motor kW 3 / 1.6 (A/C)
Continuous indexing resolution deg. 0.001 (roller cam drive)
Continuous torque output N-m 1060 / 588 (A/C)
Braked torque (clamping) N-m 2452 / 2158 (by brake, A/C)
Tools Max. tool length mm 300
Max. tool weight kg 7
Magazine capacity   30 (opt. 40)
Max. tool diameter (without adjacent tools) mm 76 (125)
Tool exchange time sec. 2.3 (T-T), 5.9 (C-C)
Pull stud angle deg. 15 (JIS 40P)
Tool selection method   Random
Machine Power requirement kVA 36 (excl. CTS) Fanuc
42 (excl. CTS) Heidenhain
Min/Max. air pressure kg/cm2 5.5 ~ 6.5
Coolant tank capacity L 400
Std. NC controller (Fanuc)   0i-MF (10.4”)
Floor space requirement (with conveyor) mm 3200 x 2848
Max. machine height mm 2962 (aiI12)
3084 (aT8i)
Machine weight kg 6000