
Vertical Machining Centers
Vcenter-FX400
- Travels (X/Y/Z):
600 / 500 / 500 mm - Rapid feeds 32/32/32 m/min
- Screw chip removers included
- Maximum part dimension: Ø400 x H160 + Ø220 x H250 mm
- Trunnion type tilting table Ø320 mm
- Fanuc 0iMF Plus control for 4+1 axis machining
- 12000 rpm BBT-40 spindle directly coupled to spindle motor

Item | Units | Vcenter-FX400 | |
---|---|---|---|
Travel | X axis travel | mm | 600 |
Y axis travel | mm | 500 | |
Z axis travel | mm | 500 | |
A/C axis travels | deg | +30°~ -120°/ 360° | |
Distance | Spindle center to column | mm | 547 |
Spindle nose to table surface | mm | 20 ~ 520 | |
Table | Table work area | mm | Φ320 |
Dimension of T-slot | mm | 12H7 | |
Max. table load | kg | 200 | |
Spindle | Spindle taper | BBT-40 | |
Spindle motor – cont./ 25% (15 min) | kW | 11 / 15 | |
Spindle speed | rpm | 12000 | |
Feed rate | Rapid feed rate - X/Y/Z (Fanuc) | m/min | 32 / 32 / 32 |
Rotary rapid feed rate – A/C (Fanuc) | rpm | 16 / 25 | |
Axis acceleration – X/Y/Z | m/sec2 | 0.4G / 0.4 / 0.5G | |
Axis feed motor - X/Y/Z/A/C | kW | 2.5 / 2.5 / 3 / 1.4 / 1.2 | |
Cutting feedrate by table | m/min | 20 | |
Continuous torque output | N-m | 1260 / 700 (A/C) | |
Braked torque (clamping) | N-m | 1500 / 750 (A/C) | |
X/Y/Z ballscrew (dia. x pitch) | mm | 40 x P16 (X/Y/Z) | |
Linear guide width (X/Y/Z) | mm | 30 / 35 / 45 | |
Tools | Max. tool length | mm | 300 |
Max. tool weight | kg | 7 | |
Magazine capacity | 24 (opt. 30) | ||
Max. tool diameter (without adjacent tools) |
mm | 75 (150) | |
Tool exchange time | sec. | 2.4 (T-T), 5.7 (C-C) | |
Pull stud angle | deg. | 15 (JIS 40P) | |
Tool selection method | Random | ||
Accuracy (ISO 230-2) | Positioning accuracy (bi-directional) | mm | 0.010 (X/Y/Z) 0.0056° (A/C) |
Repeatability | mm | 0.007 (±0.0035) 0.003° (A/C) |
|
Machine | Power requirement | kVA | 27 (excl. CTS) |
Min/Max. air pressure | kg/cm2 | 5.5 ~ 6.5 | |
Coolant tank capacity | L. | 220 | |
Std. NC controller (Fanuc) | 0i-MF Plus (10.4”, type-1) | ||
Floor space requirement | mm | 2720 x 2730 | |
Max. machine height | mm | 2962 | |
Machine weight | kg | 6100 |
Standard accessories:
- Fully enclosed splash guard
- Fanuc 0i-MF Plus (10.4”) control
- Screw-type chip remover (left disposal)
- Air blow (manual control)
- Rigid tapping
- Remote MPG
- Hand tools and toolbox
- T nuts for table slot
- 3-step warning light
- Leveling pads
Optional accessories:
- Spindle oil cooler
- Air conditioner for electric cabinet
- Air blow (controlled by M-code)
- Auto power off
- Chip conveyor with cart
- Coolant through spindle (CTS)
- 10000 rpm spindle (excl. Vc-FX400)
- 30 tool magazine
- Auto tool length measurement
- Auto part measuring
- Stop block for special tools
- 4th/5th axis interface
- Auto door
- Oil skimmer
- Linear scales
- Air gun
- Coolant gun
- Rotary tables
- Fanuc 0iMF Plus (10.4”, type-1) control (Vc-F76/F106)
- Fanuc 0iMF Plus (15”, type-0) control
- Siemens control 840D SL (full 5-axis control)