
Vertical Machining Center
Vcenter-A130
- Four linear motion guideways in Y-axis.
- Z-axis acceleration 0.6G
- Rapid feed 36/36/36 m/min minimizes non-cutting time
- Directly-coupled 12000rpm spindle assures part surface finish
- Supreme rigid column
- Easy access to working area and perfect swarf and coolant disposal

Item | Unit | Vcenter-A130 | |
---|---|---|---|
Travel | X axis travel | mm | 1300 |
Y axis travel | mm | 780 | |
Z axis travel | mm | 700 | |
Distance | Spindle center to column | mm | 770 |
Spindle nose to table surface | mm | 100 ~ 800 | |
Table | Table work area | mm | 1400 x 700 |
Dimension of T-slot | mm | 7 x 18 x 100 | |
Max. table load | kg | 1500 | |
Spindle | Spindle taper | BT-40 | |
Spindle motor - cont / 30 / 10min | kW | 7.5 / 11 / 15 Opt. 15 / 18.5 / - |
|
Spindle speed | rpm | 12000 (Opt. 15000) | |
Feed rate | Rapid feed rate - X / Y / Z | m/min | 36 / 36 / 36 |
Axis acceleration - X / Y / Z | m/sec2 | 0.5G / 0.5G / 0.6G | |
Axis feed motor - X / Y / Z | kW | 4.5 / 4.5 / 5.5 | |
Cutting feedrate by table | m/min | 10 (Opt. 15) | |
X ballscrew (dia. x pitch) | mm | 45 x P12 | |
Y ballscrew | mm | 45 x P12 | |
Z ballscrew | mm | 45 x P12 | |
Linear guide width (X / Y / Z) | mm | 45 / 35 / 55 | |
Tools | Max. tool length | mm | 300 |
Max. tool weight | kg | 7 | |
Magazine capacity | 24 (Opt. 40) | ||
Max. tool diameter (without adjacent tools) | mm | 76 (125) | |
Tool exchange time | sec. | 2.4 (T-T), 5.4 (C-C) | |
Pull stud angle | deg. | 15 (JIS 40P) | |
Tool selection method | Random | ||
Machine | Power requirement | kVA | 40 (excl. CTS) |
Min/Max. air pressure | kg/cm2 | 5.5 ~ 6.5 | |
Coolant tank capacity | L | 650 | |
Std. NC controller (Fanuc) | 0i-MD (10.4") | ||
Floor space requirement (with conveyor) | mm | 5400 x 4303 | |
Max. machine height | mm | 3102 | |
Machine weight | kg | 11000 |