| ITEM | Unit | Vcenter-G135 | |
|---|---|---|---|
| Travel | X axis travel | mm | 1350 |
| Y axis travel | mm | 700 | |
| Z axis travel | mm | 700 | |
| Distance | Spindle center to column | mm | 792 |
| Spindle nose to table surface | mm | 100 ~ 800 | |
| Table | Table work area | mm | 1400 x 700 |
| Dimension of T-slot | mm | 7 x 18 x 100 | |
| Max. table load | kg | 2200 | |
| Spindle | Spindle taper | BT-50 (opt. BBT-50) | |
| Spindle motor-cont / 30 min | kW | 15 / 18 | |
| Spindle speed | rpm | 6000 | |
| Feed rate | Rapid feed rate-X/Y/Z | m/min | 20 / 20 / 18 |
| Axis acceleration – X/Y/Z | m/sec2 | 0.28G/0.28G/0.25G | |
| Axis feed motor-X/Y/Z | kW | 3 / 3 / 3 | |
| Cutting feedrate by table | m/min | 15 | |
| X/Y ballscrew (dia. x pitch) | mm | 50 x P10 | |
| Tools | Max. tool length | mm | 300 |
| Max. tool weight | kg | 15 | |
| Magazine capacity | 24 (opt. 32, 40) | ||
| Max. tool diameter (without adjacent tools) |
mm | 127 (250) | |
| Tool exchanging time | sec. | 4.0 (T-T), 11.3 (C-C) | |
| Pull stud angle | deg. | 45 | |
| Tool selection method | Random | ||
| Accuracy (ISO-230-2) |
Positioning accuracy (bi-directional) | mm | 0.010 |
| Repeatability | mm | 0.005 (±0.0035) | |
| Machine | Power requirement | kVA | 30 (excl. CTS) |
| Min./Max. air pressure | kg/cm2 | 5.5 / 6.5 | |
| Coolant tank capacity | L | 300 | |
| Std. NC controller (Fanuc) | 0i-MF Plus (10.4") | ||
| Floor space requirement (without conveyor) |
mm | 4293 x 2963 | |
| Max. Machine height | mm | 3074 | |
| Machine weight | kg | 11500 |
