
Vertical Machining Center
Vcenter-A85/A110
- Z-axis acceleration 0.75G minimizes tool changeover time
- Rapid feed 42/42/42 m/min minimizes non-cutting time
- Directly-coupled 12000rpm spindle assures part surface finish
- Supreme rigid column increases milling & tapping efficiency
- Easy access to working area and perfect swarf and coolant disposal

Item | Unit | Vcenter-A85 | Vcenter-A110 | |
---|---|---|---|---|
Travel | X axis travel | mm | 850 | 1100 |
Y axis travel | mm | 600 | 600 | |
Z axis travel | mm | 560 | 560 | |
Distance | Spindle center to column | mm | 720 | 720 |
Spindle nose to table surface | mm | 150 ~ 710 | 150 ~ 710 | |
Table | Table work area | mm | 1100 x 600 | 1350 x 600 |
Dimension of T-slot | mm | 6 x 18 x 100 | 6 x 18 x 100 | |
Max. table load | kg | 1000 | 1200 | |
Spindle | Spindle taper | BT-40 | BT-40 | |
Spindle motor - cont / 30 / 10min | kW | 7.5 / 11 / 15 Opt. 15 / 18.5 / - |
7.5 / 11 / 15 Opt. 15 / 18.5 / - |
|
Spindle speed | rpm | 12000 (Opt. 15000) | 12000 (Opt. 15000) | |
Feed rate | Rapid feed rate - X / Y / Z | m/min | 42 / 42 / 42 | 42 / 42 / 42 |
Axis acceleration - X / Y / Z | m/sec2 | 0.5G / 0.5G / 0.75G | 0.5G / 0.5G / 0.75G | |
Axis feed motor - X / Y / Z | kW | 4.5 / 4.5 / 5.5 | 4.5 / 4.5 / 5.5 | |
Cutting feedrate by table | m/min | 10 (Opt. 15) | 10 (Opt. 15) | |
X ballscrew (dia. x pitch) | mm | 45 x P16 (Opt. P8) | 45 x P16 (Opt. P8) | |
Y ballscrew | mm | 45 x P16 (Opt. P8) | 45 x P16 (Opt. P8) | |
Z ballscrew | mm | 45 x P16 (Opt. P8) | 45 x P16 (Opt. P8) | |
Linear guide width (X / Y / Z) | mm | 45 / 45 / 45 | 45 / 45 / 45 | |
Tools | Max. tool length | mm | 300 | 300 |
Max. tool weight | kg | 7 | 7 | |
Magazine capacity | 24 (Opt. 32) | 24 (Opt. 32) | ||
Max. tool diameter (without adjacent tools) | mm | 80 (125) | 80 (125) | |
Tool exchange time | sec. | 2.4 (T-T), 5.4 (C-C) | 2.4 (T-T), 5.4 (C-C) | |
Pull stud angle | deg. | 15 (JIS 40P) | 15 (JIS 40P) | |
Tool selection method | Random | Random | ||
Machine | Power requirement | kVA | 40 (excl. CTS) | 40 (excl. CTS) |
Min/Max. air pressure | kg/cm2 | 5.5 ~ 6.5 | 5.5 ~ 6.5 | |
Coolant tank capacity | L | 510 | 550 | |
Std. NC controller (Fanuc) | 0i-MD (10.4") | 0i-MD (10.4") | ||
Floor space requirement (with conveyor) | mm | 4227 x 3570 | 4827 x 3570 | |
Max. machine height | mm | 2785 | 2785 | |
Machine weight | kg | 7070 | 7400 |