Menu Products
Home > Prodcuts > VαⅢ Series (CE)
New Generation VαШ All-Electric injection

New Generation VαШ All-Electric injection

molding machine - 50-250 Tons

  • Clamping Unit
    • Integrated guide armrest design
    Integrated and synchronized processing, improve assembly
    accuracy, reduces guide bar warp and improves mold adjustment.
  • Injection Unit - High rigidity injection Structure
    • Injection casting Integrated design
    and all processed synchronized, high strength and precision.
  • Energy Saving From Vα All-Electric
    • Huge energy saving cuts molding costs, plant construction and operation costs. Energy Saving up to 60% as compared with general hydraulic machine.
  • Quiet Operation! (Low noise)

VαIII Machine specifications (EUROMAP)

Model
 　
VαIII-50C
VαIII-50D
Injection unit
Screw dia. mm 22 26 28 32
Calculated Injection Capacity cm3 34 48 62 80
Actual Shot weight - (PS) g 32 45 58 76
oz 1.1 1.6 2.0 2.7
Plastizing capacity g/s 5.1 8.0 9.7 14.2
Screw L/D ratio  m/m 23.6 20 22.9 20
MIRLE system Standard Injection rate cm3/s 114 159 185 241
Injection speed mm/sec 300 300
Long holding type Injection rate cm3/s 65 90 105 137
Injection speed mm/sec 170 170
Injection pressure-Max. kgf/cm2 2500 2127 2440 1868
Holding pressure-Max. kgf/cm2 2125 1808 2074 1588
Screw stroke mm 90 100
Screw speed rpm 375 375
Calculated Nozzle contact force ton 1 1.5
Clamping unit
Clamping force ton 50
Clamp stroke - Max. mm 270
Mold thickness Min.~Max. mm 150-350
 Open daylight - Max.  mm 620
Tie-Bar distance (H×V)  mm 360×310
Platen dimensions (H×V) mm 505×502
Ejector stroke mm 70
Ejector force ton 2
Dry. Cycle time sec. 1.8
 General
Total Heating wattage kw 4.64 5.8
Machine weight ton 2850
Machine size (L×W×H)  mm 3528x1275x1528
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-80D
VαIII-80F
Injection unit
Screw dia. mm 28 32 32 36
Calculated Injection Capacity cm3 62 80 117 148
Actual Shot weight - (PS) g 58 76 110 139
oz 2.0 2.7 3.9 4.9
Plastizing capacity g/s 9.7 14.2 13.8 19.0
Screw L/D ratio  m/m 22 20 22.5 20
MIRLE system Standard Injection rate cm3/s 185 241 241 305
Injection speed mm/sec 300 300
Long holding type Injection rate cm3/s 105 137 137 173
Injection speed mm/sec 170 170
Injection pressure-Max. kgf/cm2 2440 1868 2478 1958
Holding pressure-Max. kgf/cm2 2074 1588 2106 1664
Screw stroke mm 100 145
Screw speed rpm 375 365
Calculated Nozzle contact force ton 1.5 2
Clamping unit
Clamping force ton 80
Clamp stroke - Max. mm 320
Mold thickness Min.~Max. mm 150-380
 Open daylight - Max.  mm 700
Tie-Bar distance (H×V)  mm 410×360
Platen dimensions (H×V) mm 585×530
Ejector stroke mm 80
Ejector force ton 2.5
Dry. Cycle time sec. 2.1
 General
Total Heating wattage kw 5.8 6.8
Machine weight ton 4088
Machine size (L×W×H) mm 4322x1329x1605.5
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-100D
VαIII-100F
Injection unit
Screw dia. mm 28 32 32 36
Calculated Injection Capacity cm3 62 80 117 148
Actual Shot weight - (PS) g 58 76 110 139
oz 2.0 2.7 3.9 4.9
Plastizing capacity g/s 9.7 12.1 13.8 19.0
Screw L/D ratio  m/m 22.9 20 22.5 20
MIRLE system Standard Injection rate cm3/s 185 241 241 305
Injection speed mm/sec 300 300
Long holding type Injection rate cm3/s 105 137 137 173
Injection speed mm/sec 170 170
Injection pressure-Max. kgf/cm2 2440 1868 2478 1958
Holding pressure-Max. kgf/cm2 2074 1588 2106 1664
Screw stroke mm 100 145
Screw speed rpm 375 365
Calculated Nozzle contact force ton 1.5 2
Clamping unit
Clamping force ton 100
Clamp stroke - Max. mm 360
Mold thickness Min.~Max. mm 150-450
 Open daylight - Max.  mm 810
Tie-Bar distance (H×V)  mm 460×410 
Platen dimensions (H×V) mm 640×595
Ejector stroke mm 100
Ejector force ton 2.5
Dry. Cycle time sec. 2.25
 General
Total Heating wattage kw 5.8 6.8
Machine weight ton 4706
Machine size (L×W×H) mm 4559X1377X1624
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-130F
VαIII-130G
Injection unit
Screw dia. mm 32 36 36 40 46
Calculated Injection Capacity cm3 117 148 163 201 266
Actual Shot weight - (PS) g 110 139 153 189 250
oz 3.9 4.9 5.4 6.7 8.8
Plastizing capacity g/s 13.8 19.0 15.1 19.4 28.4
Screw L/D ratio  m/m 22.5 20 22.2 20 17.4
MIRLE system Standard Injection rate cm3/s 241 305 204 251 332
Injection speed mm/sec 300 200
Long holding type Injection rate cm3/s 137 173 132 163 216
Injection speed mm/sec 170 130
Injection pressure-Max. kgf/cm2 2478 1958 2500 2104 1591
Holding pressure-Max. kgf/cm2 2106 1664 2125 1788 1352
Screw stroke mm 145 160
Screw speed rpm 365 280
Calculated Nozzle contact force ton 2 2.5
Clamping unit
Clamping force ton 130
Clamp stroke - Max. mm 400
Mold thickness Min.~Max. mm 180-450
 Open daylight - Max.  mm 850
Tie-Bar distance (H×V)  mm 510×460 
Platen dimensions (H×V) mm 720×685
Ejector stroke mm 110
Ejector force ton 3.3
Dry. Cycle time sec. 2.5
 General
Total Heating wattage kw 6.8 8.02
Machine weight ton 6502
Machine size (L×W×H) mm 5282X1420X1778
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-180G
VαIII-180H
Injection unit
Screw dia. mm 36 40 46 46 50 55
Calculated Injection Capacity cm3 163 201 266 332 393 475
Actual Shot weight - (PS) g 153 189 250 312 369 447
oz 5.4 6.7 8.8 11.0 13.0 15.7
Plastizing capacity g/s 15.1 19.4 28.4 28.4 35.3 44.0
Screw L/D ratio  m/m 22.2 20 17.4 21.7 20 18.2
MIRLE system Standard Injection rate cm3/s 204 251 332 266 314 380
Injection speed mm/sec 200 160
Long holding type Injection rate cm3/s 132 163 216 199 236 285
Injection speed mm/sec 130 120
Injection pressure-Max. kgf/cm2 2500 2104 1591 2264 1917 1584
Holding pressure-Max. kgf/cm2 2125 1788 1352 1924 1629 1346
Screw stroke mm 160 200
Screw speed rpm 280 280
Calculated Nozzle contact force ton 2.5 2.5
Clamping unit
Clamping force ton 180
Clamp stroke - Max. mm 470
Mold thickness Min.~Max. mm 200-480
 Open daylight - Max.  mm 950
Tie-Bar distance (H×V)  mm 560×510 
Platen dimensions (H×V) mm 785×745
Ejector stroke mm 120
Ejector force ton 3.3
Dry. Cycle time sec. 2.7
 General
Total Heating wattage kw 8.02 12.95
Machine weight ton 8873
Machine size (L×W×H) mm 5717X1505X1915
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-250H
VαIII-180H
Injection unit
Screw dia. mm 46 50 55 50 55 63
Calculated Injection Capacity cm3 332 393 475 471 570 748
Actual Shot weight - (PS) g 312 369 447 443 536 703
oz 11.0 13.0 15.7 15.6 18.9 24.8
Plastizing capacity g/s 28.4 35.3 44.0 32.7 40.8 55.2
Screw L/D ratio  m/m 21.7 20 18.2 22.4 20.3 17.7
MIRLE system Standard Injection rate cm3/s 266 314 380 314 380 499
Injection speed mm/sec 160 160
Long holding type Injection rate cm3/s 199 236 285 236 285 374
Injection speed mm/sec 120 120
Injection pressure-Max. kgf/cm2 2264 1917 1584 1829 1511 1151
Holding pressure-Max. kgf/cm2 1924 1629 1346 314 380 499
Screw stroke mm 200 240
Screw speed rpm 280 260
Calculated Nozzle contact force ton 2.5 3
Clamping unit
Clamping force ton 250
Clamp stroke - Max. mm 520
Mold thickness Min.~Max. mm 250-600
 Open daylight - Max.  mm 1120
Tie-Bar distance (H×V)  mm 610×560 
Platen dimensions (H×V) mm 885×830
Ejector stroke mm 150
Ejector force ton 4.5
Dry. Cycle time sec. 2.95
 General
Total Heating wattage kw 12.95 18.6
Machine weight ton 11500
Machine size (L×W×H) mm 6165×1621×2066
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.

VαIII Machine specifications (SPI)

Model
 　
VαIII-50C
VαIII-50D
Injection unit
Screw dia. in 0.86 1.02 0.39 1.25
Calculated Injection Capacity in3 2.1 2.9 3.8 4.9
Actual Shot weight - (PS) g 32 45 58 76
oz 1.1 1.6 2.0 2.7
Plastizing capacity g/s 5.1 8.0 9.7 14.2
Screw L/D ratio  　 23.6 20 22.9 20
MIRLE system Standard Injection rate in3/s 7.0 9.7 11.3 14.7
Injection speed in/sec 11.81 11.81
Long holding type Injection rate in3/s 3.9 5.5 6.4 8.3
Injection speed in/sec 6.69 6.69
Injection pressure-Max. Psi 35557 30252 34704 26568
Holding pressure-Max. Psi 30223 25715 29498 22586
Screw stroke in 3.54 3.93
Screw speed rpm 375 375
Calculated Nozzle contact force U.S. ton 1.1 1.65
Clamping unit　　
Clamping force U.S. ton 55
Clamp stroke - Max. in 10.62
Mold thickness Min.~Max. in 5.9-13.77
 Open daylight - Max.  in 24.4
Tie-Bar distance (H×V)  in 14.17×12.2
Platen dimensions (H×V) in 19.88×19.76
Ejector stroke in 2.75
Ejector force ton 2
Dry. Cycle time sec. 1.8
 General　
Total Heating wattage kw 4.64 5.8
Machine weight U.S. ton 3141
Machine size (L×W×H)  in 138.89x50.19x60.15
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-80D
VαIII-80F
Injection unit
Screw dia. in 0.39 1.25 1.25 1.41
Calculated Injection Capacity in3 3.8 4.9 7.1 9.0
Actual Shot weight - (PS) g 58 76 110 139
oz 2.0 2.7 3.9 4.9
Plastizing capacity g/s 9.7 14.2 13.8 19.0
Screw L/D ratio  　 22 20 22.5 20
MIRLE system Standard Injection rate in3/s 11.3 14.7 14.7 18.6
Injection speed in/sec 11.81 11.81
Long holding type Injection rate in3/s 6.4 8.3 8.3 10.6
Injection speed in/sec 6.69 6.69
Injection pressure-Max. Psi 34704 26568 35244 27848
Holding pressure-Max. Psi 29498 22586 29953 23667
Screw stroke in 3.93 5.7
Screw speed rpm 375 365
Calculated Nozzle contact force U.S. ton 1.65 2.2
Clamping unit　　
Clamping force U.S. ton 88
Clamp stroke - Max. in 12.59
Mold thickness Min.~Max. in 5.9-14.96
 Open daylight - Max.  in 27.55
Tie-Bar distance (H×V)  in 16.41×14.17
Platen dimensions (H×V) in 23.03×20.86
Ejector stroke in 3.14
Ejector force ton 2.5
Dry. Cycle time sec. 2.1
 General　
Total Heating wattage kw 5.8 6.8
Machine weight U.S. ton 4506
Machine size (L×W×H)  in 170.15x52.32x63.22
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-100D
VαIII-100F
Injection unit
Screw dia. in 0.39 1.25 1.25 1.41
Calculated Injection Capacity in3 3.8 4.9 7.1 9.0
Actual Shot weight - (PS) g 58 76 110 139
oz 2.0 2.7 3.9 4.9
Plastizing capacity g/s 9.7 12.1 13.8 19.0
Screw L/D ratio  　 22.9 20 22.5 20
MIRLE system Standard Injection rate in3/s 11.3 14.7 14.7 18.6
Injection speed in/sec 11.81 11.81
Long holding type Injection rate in3/s 6.4 8.3 8.3 10.6
Injection speed in/sec 6.69 6.69
Injection pressure-Max. Psi 34704 26568 35244 27848
Holding pressure-Max. Psi 29498 22586 29953 23667
Screw stroke in 3.93 5.7
Screw speed rpm 375 365
Calculated Nozzle contact force U.S. ton 1.65 2.2
Clamping unit　　
Clamping force U.S. ton 110
Clamp stroke - Max. in 14.17
Mold thickness Min.~Max. in 5.9-17.71
 Open daylight - Max.  in 31.88
Tie-Bar distance (H×V)  in 18.11×16.14 
Platen dimensions (H×V) in 25.19×23.42
Ejector stroke in 3.93
Ejector force ton 2.5
Dry. Cycle time sec. 2.25
 General　
Total Heating wattage kw 5.8 6.8
Machine weight U.S. ton 5187
Machine size (L×W×H)  in 179.48X54.21X63.93
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-130F
VαIII-130G
Injection unit
Screw dia. in 1.25 1.41 1.41 1.57 1.81
Calculated Injection Capacity in3 7.1 9.0 9.9 12.3 16.2
Actual Shot weight - (PS) g 110 139 153 189 250
oz 3.9 4.9 5.4 6.7 8.8
Plastizing capacity g/s 13.8 19.0 15.1 19.4 28.4
Screw L/D ratio  　 22.5 20 22.2 20 17.4
MIRLE system Standard Injection rate in3/s 14.7 18.6 12.4 15.3 20.3
Injection speed in/sec 11.81 7.87
Long holding type Injection rate in3/s 8.3 10.6 8.1 10.0 13.2
Injection speed in/sec 6.69 5.11
Injection pressure-Max. Psi 35244 27848 35557 29925 22628
Holding pressure-Max. Psi 29953 23667 30223 25430 19229
Screw stroke in 5.7 6.29
Screw speed rpm 365 280
Calculated Nozzle contact force U.S. ton 2.2 2.75
Clamping unit
Clamping force U.S. ton 143
Clamp stroke - Max. in 15.74
Mold thickness Min.~Max. in 7.08-17.71
 Open daylight - Max.  in 33.46
Tie-Bar distance (H×V)  in 20.07×18.11 
Platen dimensions (H×V) in 28.34×26.96
Ejector stroke in 4.33
Ejector force ton 3.3
Dry. Cycle time sec. 2.5
 General
Total Heating wattage kw 6.8 8.02
Machine weight U.S. ton 7167
Machine size (L×W×H) in 207.95X55.9X69.99
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-180G
VαIII-180H
Injection unit
Screw dia. in 1.41 1.57 1.81 1.81 1.96 2.16
Calculated Injection Capacity in3 9.9 12.3 16.2 20.3 24.0 29.0
Actual Shot weight - (PS) g 153 189 250 312 369 447
oz 5.4 6.7 8.8 11.0 13.0 15.7
Plastizing capacity g/s 15.1 19.4 28.4 28.4 35.3 44.0
Screw L/D ratio  　 22.2 20 17.4 21.7 20 18.2
MIRLE system Standard Injection rate in3/s 12.4 15.3 20.3 16.2 19.2 23.2
Injection speed in/sec 7.87 6.29
Long holding type Injection rate in3/s 8.1 10.0 13.2 12.2 14.4 17.4
Injection speed in/sec 5.11 4.72
Injection pressure-Max. Psi 35557 29925 22628 32200 27265 22529
Holding pressure-Max. Psi 30223 25430 19229 27365 23169 19144
Screw stroke in 6.29 7.87
Screw speed rpm 280 280
Calculated Nozzle contact force U.S. ton 2.75 2.75
Clamping unit
Clamping force U.S. ton 198
Clamp stroke - Max. in 18.5
Mold thickness Min.~Max. in 7.87-18.89
 Open daylight - Max.  in 37.4
Tie-Bar distance (H×V)  in 22.04×20.07 
Platen dimensions (H×V) in 30.9×29.33
Ejector stroke in 4.72
Ejector force ton 3.3
Dry. Cycle time sec. 2.7
 General
Total Heating wattage kw 8.02 12.95
Machine weight U.S. ton 9780
Machine size (L×W×H) in 225.07X59.25X75.39
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.
Model
 　
VαIII-250H
VαIII-250J
Injection unit
Screw dia. in 1.81 1.96 2.16 1.96 2.16 2.48
Calculated Injection Capacity in3 20.3 24.0 29.0 28.8 34.8 45.7
Actual Shot weight - (PS) g 312 369 447 443 536 703
oz 11.0 13.0 15.7 15.6 18.9 24.8
Plastizing capacity g/s 28.4 35.3 44.0 32.7 40.8 55.2
Screw L/D ratio  　 21.7 20 18.2 22.4 20.3 17.7
MIRLE system Standard Injection rate in3/s 16.2 19.2 23.2 19.2 23.2 30.4
Injection speed in/sec 6.29 6.29
Long holding type Injection rate in3/s 12.2 14.4 17.4 14.4 17.4 22.8
Injection speed in/sec 4.72 4.72
Injection pressure-Max. Psi 32200 27265 22529 26023 21490 16370
Holding pressure-Max. Psi 27365 23169 19144 4466 5404 7097
Screw stroke in 7.87 9.44
Screw speed rpm 280 260
Calculated Nozzle contact force U.S. ton 2.75 3.3
Clamping unit
Clamping force U.S. ton 275
Clamp stroke - Max. in 20.47
Mold thickness Min.~Max. in 9.84-23.62
 Open daylight - Max.  in 44.09
Tie-Bar distance (H×V)  in 24.01×22.04 
Platen dimensions (H×V) in 34.84×32.67
Ejector stroke in 5.9
Ejector force ton 4.5
Dry. Cycle time sec. 2.95
 General
Total Heating wattage kw 12.95 18.6
Machine weight U.S. ton 12.676
Machine size (L×W×H) in 242.71×63.81×81.33
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice.

VαⅢ 系列