Model (Euromap Platen Information) |
VαIII-130G |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | mm | 36 | 40 | 46 | ||
| Calculated Injection Capacity | cm3 | 163 | 201 | 266 | ||
| Actual Shot weight - (PS) | g | 153 | 189 | 250 | ||
| oz | 5.4 | 6.7 | 8.8 | |||
| Plastizing capacity | g/s | 15.1 | 19.4 | 28.4 | ||
| Screw L/D ratio | m/m | 22.2 | 20 | 17.4 | ||
| MIRLE system | Standard | Injection rate | cm3/s | 204 | 251 | 332 |
| Injection speed | mm/sec | 200 | ||||
| Long holding type | Injection rate | cm3/s | 132 | 163 | 216 | |
| Injection speed | mm/sec | 130 | ||||
| Injection pressure-Max. | kgf/cm2 | 2500 | 2104 | 1591 | ||
| Holding pressure-Max. | kgf/cm2 | 2125 | 1788 | 1352 | ||
| Screw stroke | mm | 160 | ||||
| Screw speed | rpm | 280 | ||||
| Calculated Nozzle contact force | ton | 2.5 | ||||
| Clamping unit | ||||||
| Clamping force | ton | 130 | ||||
| Clamp stroke - Max. | mm | 400 | ||||
| Mold thickness Min.~Max. | mm | 180-450 | ||||
| Open daylight - Max. | mm | 850 | ||||
| Tie-Bar distance (H×V) | mm | 510×460 | ||||
| Platen dimensions (H×V) | mm | 720×685 | ||||
| Ejector stroke | mm | 110 | ||||
| Ejector force | ton | 3.3 | ||||
| Dry. Cycle time | sec. | 2.5 | ||||
| General | ||||||
| Total Heating wattage | kw | 8.02 | ||||
| Machine weight | ton | 6502 | ||||
| Machine size (L×W×H) | mm | 5282X1420X1778 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
Model (SPI Platen Information) |
VαIII-130G |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | in | 1.41 | 1.57 | 1.81 | ||
| Calculated Injection Capacity | in3 | 9.9 | 12.3 | 16.2 | ||
| Actual Shot weight - (PS) | g | 153 | 189 | 250 | ||
| oz | 5.4 | 6.7 | 8.8 | |||
| Plastizing capacity | g/s | 15.1 | 19.4 | 28.4 | ||
| Screw L/D ratio | 22.2 | 20 | 17.4 | |||
| MIRLE system | Standard | Injection rate | in3/s | 12.4 | 15.3 | 20.3 |
| Injection speed | in/sec | 7.87 | ||||
| Long holding type | Injection rate | in3/s | 8.1 | 10.0 | 13.2 | |
| Injection speed | in/sec | 5.11 | ||||
| Injection pressure-Max. | Psi | 35557 | 29925 | 22628 | ||
| Holding pressure-Max. | Psi | 30223 | 25430 | 19229 | ||
| Screw stroke | in | 6.29 | ||||
| Screw speed | rpm | 280 | ||||
| Calculated Nozzle contact force | U.S. ton | 2.75 | ||||
| Clamping unit | ||||||
| Clamping force | U.S. ton | 143 | ||||
| Clamp stroke - Max. | in | 15.74 | ||||
| Mold thickness Min.~Max. | in | 7.08-17.71 | ||||
| Open daylight - Max. | in | 33.46 | ||||
| Tie-Bar distance (H×V) | in | 20.07×18.11 | ||||
| Platen dimensions (H×V) | in | 28.34×26.96 | ||||
| Ejector stroke | in | 4.33 | ||||
| Ejector force | ton | 3.3 | ||||
| Dry. Cycle time | sec. | 2.5 | ||||
| General | ||||||
| Total Heating wattage | kw | 8.02 | ||||
| Machine weight | U.S. ton | 7167 | ||||
| Machine size (L×W×H) | in | 207.95X55.9X69.99 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
