Model (Euromap Platen Information) |
VαIII-130F |
||||
|---|---|---|---|---|---|
| Injection unit | |||||
| Screw dia. | mm | 32 | 36 | ||
| Calculated Injection Capacity | cm3 | 117 | 148 | ||
| Actual Shot weight - (PS) | g | 110 | 139 | ||
| oz | 3.9 | 4.9 | |||
| Plastizing capacity | g/s | 13.8 | 19.0 | ||
| Screw L/D ratio | m/m | 22.5 | 20 | ||
| MIRLE system | Standard | Injection rate | cm3/s | 241 | 305 |
| Injection speed | mm/sec | 300 | |||
| Long holding type | Injection rate | cm3/s | 137 | 173 | |
| Injection speed | mm/sec | 170 | |||
| Injection pressure-Max. | kgf/cm2 | 2478 | 1958 | ||
| Holding pressure-Max. | kgf/cm2 | 2106 | 1664 | ||
| Screw stroke | mm | 145 | |||
| Screw speed | rpm | 365 | |||
| Calculated Nozzle contact force | ton | 2 | |||
| Clamping unit | |||||
| Clamping force | ton | 130 | |||
| Clamp stroke - Max. | mm | 400 | |||
| Mold thickness Min.~Max. | mm | 180-450 | |||
| Open daylight - Max. | mm | 850 | |||
| Tie-Bar distance (H×V) | mm | 510×460 | |||
| Platen dimensions (H×V) | mm | 720×685 | |||
| Ejector stroke | mm | 110 | |||
| Ejector force | ton | 3.3 | |||
| Dry. Cycle time | sec. | 2.5 | |||
| General | |||||
| Total Heating wattage | kw | 6.8 | |||
| Machine weight | ton | 6502 | |||
| Machine size (L×W×H) | mm | 5282X1420X1778 | |||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | |||||
Model (SPI Platen Information) |
VαIII-130F |
||||
|---|---|---|---|---|---|
| Injection unit | |||||
| Screw dia. | in | 1.25 | 1.41 | ||
| Calculated Injection Capacity | in3 | 7.1 | 9.0 | ||
| Actual Shot weight - (PS) | g | 110 | 139 | ||
| oz | 3.9 | 4.9 | |||
| Plastizing capacity | g/s | 13.8 | 19.0 | ||
| Screw L/D ratio | 22.5 | 20 | |||
| MIRLE system | Standard | Injection rate | in3/s | 14.7 | 18.6 |
| Injection speed | in/sec | 11.81 | |||
| Long holding type | Injection rate | in3/s | 8.3 | 10.6 | |
| Injection speed | in/sec | 6.69 | |||
| Injection pressure-Max. | Psi | 35244 | 27848 | ||
| Holding pressure-Max. | Psi | 29953 | 23667 | ||
| Screw stroke | in | 5.7 | |||
| Screw speed | rpm | 365 | |||
| Calculated Nozzle contact force | U.S. ton | 2.2 | |||
| Clamping unit | |||||
| Clamping force | U.S. ton | 143 | |||
| Clamp stroke - Max. | in | 15.74 | |||
| Mold thickness Min.~Max. | in | 7.08-17.71 | |||
| Open daylight - Max. | in | 33.46 | |||
| Tie-Bar distance (H×V) | in | 20.07×18.11 | |||
| Platen dimensions (H×V) | in | 28.34×26.96 | |||
| Ejector stroke | in | 4.33 | |||
| Ejector force | ton | 3.3 | |||
| Dry. Cycle time | sec. | 2.5 | |||
| General | |||||
| Total Heating wattage | kw | 6.8 | |||
| Machine weight | U.S. ton | 7167 | |||
| Machine size (L×W×H) | in | 207.95X55.9X69.99 | |||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | |||||
