Model (Euromap Platen Information) |
VαIII-250H |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | mm | 46 | 50 | 55 | ||
| Calculated Injection Capacity | cm3 | 332 | 393 | 475 | ||
| Actual Shot weight - (PS) | g | 312 | 369 | 447 | ||
| oz | 11.0 | 13.0 | 15.7 | |||
| Plastizing capacity | g/s | 28.4 | 35.3 | 44.0 | ||
| Screw L/D ratio | m/m | 21.7 | 20 | 18.2 | ||
| MIRLE system | Standard | Injection rate | cm3/s | 266 | 314 | 380 |
| Injection speed | mm/sec | 160 | ||||
| Long holding type | Injection rate | cm3/s | 199 | 236 | 285 | |
| Injection speed | mm/sec | 120 | ||||
| Injection pressure-Max. | kgf/cm2 | 2264 | 1917 | 1584 | ||
| Holding pressure-Max. | kgf/cm2 | 1924 | 1629 | 1346 | ||
| Screw stroke | mm | 200 | ||||
| Screw speed | rpm | 280 | ||||
| Calculated Nozzle contact force | ton | 2.5 | ||||
| Clamping unit | ||||||
| Clamping force | ton | 250 | ||||
| Clamp stroke - Max. | mm | 520 | ||||
| Mold thickness Min.~Max. | mm | 250-600 | ||||
| Open daylight - Max. | mm | 1120 | ||||
| Tie-Bar distance (H×V) | mm | 610×560 | ||||
| Platen dimensions (H×V) | mm | 885×830 | ||||
| Ejector stroke | mm | 150 | ||||
| Ejector force | ton | 4.5 | ||||
| Dry. Cycle time | sec. | 2.95 | ||||
| General | ||||||
| Total Heating wattage | kw | 12.95 | ||||
| Machine weight | ton | 11500 | ||||
| Machine size (L×W×H) | mm | 6165×1621×2066 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
Model (SPI Platen Information) |
VαIII-250H |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | in | 1.81 | 1.96 | 2.16 | ||
| Calculated Injection Capacity | in3 | 20.3 | 24.0 | 29.0 | ||
| Actual Shot weight - (PS) | g | 312 | 369 | 447 | ||
| oz | 11.0 | 13.0 | 15.7 | |||
| Plastizing capacity | g/s | 28.4 | 35.3 | 44.0 | ||
| Screw L/D ratio | 21.7 | 20 | 18.2 | |||
| MIRLE system | Standard | Injection rate | in3/s | 16.2 | 19.2 | 23.2 |
| Injection speed | in/sec | 6.29 | ||||
| Long holding type | Injection rate | in3/s | 12.2 | 14.4 | 17.4 | |
| Injection speed | in/sec | 4.72 | ||||
| Injection pressure-Max. | Psi | 32200 | 27265 | 22529 | ||
| Holding pressure-Max. | Psi | 27365 | 23169 | 19144 | ||
| Screw stroke | in | 7.87 | ||||
| Screw speed | rpm | 280 | ||||
| Calculated Nozzle contact force | U.S. ton | 2.75 | ||||
| Clamping unit | ||||||
| Clamping force | U.S. ton | 275 | ||||
| Clamp stroke - Max. | in | 20.47 | ||||
| Mold thickness Min.~Max. | in | 9.84-23.62 | ||||
| Open daylight - Max. | in | 44.09 | ||||
| Tie-Bar distance (H×V) | in | 24.01×22.04 | ||||
| Platen dimensions (H×V) | in | 34.84×32.67 | ||||
| Ejector stroke | in | 5.9 | ||||
| Ejector force | ton | 4.5 | ||||
| Dry. Cycle time | sec. | 2.95 | ||||
| General | ||||||
| Total Heating wattage | kw | 12.95 | ||||
| Machine weight | U.S. ton | 12.676 | ||||
| Machine size (L×W×H) | in | 242.71×63.81×81.33 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
