Model |
VsP-90 |
|||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Injection Unit | ||||||||||||||||||||||||
Injection unit size | S | K | M | |||||||||||||||||||||
Screw Diameter | mm | 22 | 25 | 28 | 32 | 36 | 32 | 36 | 40 | |||||||||||||||
Calculated Injection Capacity | com3 | 38 | 49 | 62 | 80 | 102 | 117 | 148 | 182 | |||||||||||||||
Actual Shot weight-PS | g | 36 | 46 | 58 | 75 | 95 | 109 | 138 | 171 | |||||||||||||||
oz | 1.3 | 1.6 | 2.0 | 2.7 | 3.4 | 3.8 | 4.9 | 6.0 | ||||||||||||||||
Actual Plasticzing Capacity-PS | g/s | 5.55 | 8.05 | 10.00 | 14.44 | 19.72 | 11.11 | 15.00 | 20.00 | |||||||||||||||
Actual Plasticzing Capacity-PS | kg/hr | 20.00 | 29.00 | 36.00 | 52.00 | 71.00 | 40.00 | 54.00 | 72.00 | |||||||||||||||
Injection Pressure-Max. | kgf/com2 | 2500 | 2333 | 2500 | 2017 | 1594 | 2490 | 1968 | 1594 | |||||||||||||||
Injection rate | com3/sec | 64 | 83 | 104 | 136 | 172 | 110 | 140 | 172 | |||||||||||||||
Calculated Injection Speed-Max. | mm/sec | 169 | 169 | 137 | ||||||||||||||||||||
L/D ratio | 22.7 | 20 | 22.9 | 20 | 17.8 | 22.5 | 20 | 18 | ||||||||||||||||
Screw Speed | rpm | 400 | 375 | 285 | ||||||||||||||||||||
Screw stroke | mm | 100 | 100 | 145 | ||||||||||||||||||||
Calculated Nozzle contact force | ton | 5 | 5 | 5 | ||||||||||||||||||||
Total Heating wattage | kw | 7.2 | 10.35 | 11.43 | ||||||||||||||||||||
Clamping unit | ||||||||||||||||||||||||
Clamping Force | ton | 90 | ||||||||||||||||||||||
Tie-Bar distance (HxV) | mm | 360 x 360 | ||||||||||||||||||||||
thickness Min. - Max. | mm | 150 - 350 | ||||||||||||||||||||||
Clamp stroke-Max. | mm | 320 | ||||||||||||||||||||||
Open daylight-Max. | mm | 670 | ||||||||||||||||||||||
Platen dimensions (HxV) | mm | 560 x 540 | ||||||||||||||||||||||
Ejector stroke | mm | 100 | ||||||||||||||||||||||
Ejector force | ton | 4 | ||||||||||||||||||||||
Dry. Cycle time | sec. | 2.5 | ||||||||||||||||||||||
General | ||||||||||||||||||||||||
Motor (Standard) | HP/ (Kw) | 25 / (18.5) | ||||||||||||||||||||||
Servo Motor Pump (ES Option) | kw | 16(M)/22(D) | ||||||||||||||||||||||
Oil tank capacity | l | 185 | ||||||||||||||||||||||
Hydraulic sys. Pressure | kgf/com2 | 170 | ||||||||||||||||||||||
Machine weight | ton | 2.9 | ||||||||||||||||||||||
Machine size (LxWxH) | mm | 4122 x 1265 x 1928 | ||||||||||||||||||||||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model |
VsP-90 |
|||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Injection Unit | ||||||||||||||||||||||||
Injection unit size | S | K | M | |||||||||||||||||||||
Screw Diameter | in | 0.86 | 0.98 | 1.1 | 1.25 | 1.41 | 1.25 | 1.41 | 1.57 | |||||||||||||||
Calculated Injection Capacity | in³ | 2.31 | 2.99 | 3.78 | 4.88 | 6.22 | 7.14 | 9.03 | 11.1 | |||||||||||||||
Actual Shot weight-PS | g | 36 | 46 | 58 | 75 | 95 | 109 | 138 | 171 | |||||||||||||||
oz | 1.3 | 1.6 | 2.0 | 2.7 | 3.4 | 3.8 | 4.9 | 6.0 | ||||||||||||||||
Actual Plasticzing Capacity-PS | g/s | 5.55 | 8.05 | 10.00 | 14.44 | 19.72 | 11.11 | 15.00 | 20.00 | |||||||||||||||
Actual Plasticzing Capacity-PS | kg/hr | 20.00 | 29.00 | 36.00 | 52.00 | 71.00 | 40.00 | 54.00 | 72.00 | |||||||||||||||
Injection Pressure-Max. | Psi | 35557 | 33168 | 35557 | 28687 | 22671 | 35415 | 27976 | 22657 | |||||||||||||||
Injection rate | in³/sec | 3.90 | 5.06 | 6.34 | 8.29 | 10.49 | 6.71 | 8.54 | 10.49 | |||||||||||||||
Calculated Injection Speed-Max. | in/sec | 6.65 | 6.65 | 5.39 | ||||||||||||||||||||
L/D ratio | 22.7 | 20 | 22.9 | 20 | 17.8 | 22.5 | 20 | 18 | ||||||||||||||||
Screw Speed | rpm | 400 | 375 | 285 | ||||||||||||||||||||
Screw stroke | in | 3.937 | 3.937 | 5.7 | ||||||||||||||||||||
Calculated Nozzle contact force | U.S. ton | 5.5 | 5.5 | 5.5 | ||||||||||||||||||||
Total Heating wattage | kw | 7.2 | 10.35 | 11.43 | ||||||||||||||||||||
Clamping unit | ||||||||||||||||||||||||
Clamping Force | U.S. ton | 99.2 | ||||||||||||||||||||||
Tie-Bar distance (HxV) | in | 14.1 x 14.1 | ||||||||||||||||||||||
Mold thickness Min. - Max. | in | 5.9 - 13.77 | ||||||||||||||||||||||
Clamp stroke-Max. | in | 12.598 | ||||||||||||||||||||||
Open daylight-Max. | in | 26.377 | ||||||||||||||||||||||
Platen dimensions (HxV) | in | 22.0 x 21.2 | ||||||||||||||||||||||
Ejector stroke | in | 3.937 | ||||||||||||||||||||||
Ejector force | U.S. ton | 4.409 | ||||||||||||||||||||||
Dry. Cycle time | sec. | 2.5 | ||||||||||||||||||||||
General | ||||||||||||||||||||||||
Motor (Standard) | HP/ (kw) | 25 / (18.5) | ||||||||||||||||||||||
Servo Motor Pump (YUKEN ES) | kw | 16(M)/22(D) | ||||||||||||||||||||||
Oil tank capacity | L | 165 | ||||||||||||||||||||||
Hydraulic sys. Pressure | Psi | 2417 | ||||||||||||||||||||||
Machine weight | U.S. ton | 3.086 | ||||||||||||||||||||||
Machine size (LxWxH) | in | 162.28 x 49.8 x 75.91 | ||||||||||||||||||||||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |