Model (Euromap Platen Information) |
Ve-120 |
|||
|---|---|---|---|---|
Injection Unit |
||||
| Calculated Injection Capacity | cm3 | 145 | 181 | 222 |
| Actual shot weight-PS | grams | 135 | 169 | 208 |
| Actual shot weight-PS | oz | 4.8 | 6 | 7.3 |
| Calculated Plasticizing Capacity-PS | g/s | 11 | 15 | 20 |
| Injection pressure-Max | kgf/cm2 | 1798 | 1439 | 1178 |
| Injection rate | cm3/sec | 101 | 128 | 157 |
| Screw duameter | mm | 34 | 38 | 42 |
| Screw L/D ratio | 22 | 20 | 19 | |
| Screw speed | rpm | 245 | ||
| Screw stroke | mm | 160 | ||
| Nozzle stroke | mm | 280 | ||
| Nozzle contact force | ton | 2.77 | ||
| Total heating wattage | kW | 7.1 | ||
Clamping Unit |
||||
| Clamping force | ton | 140 | ||
| Max. Clamping stroke | mm | 350 | ||
| Max. Open daylight | mm | 800 | ||
| Min/Max. Mould thickness | mm | 120-450 | ||
| Platen dimensions (HXV) | mm | 620x620 | ||
| Tie-bar distance(HXV) | mm | 410x410 | ||
| Ejector stroke | mm | 100 | ||
| Ejector force | ton | 3.3 | ||
General |
||||
| Pump motor power (Standard) | Hp(kw) | 20(15) | ||
| Servomotor power (Option ES Model) | kw | 11(M)+15(D) | ||
| Oil tank capacity | liters | 150 | ||
| System pressure-Max | kgf/cm2 | 140 | ||
| Machine weight | ton | 4.3 | ||
| Machine dimension (LxWxH) | m | 4.4x1.2x1 .8 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※ Servomotor (ES Model) for optional. (M) = Servomotor (D)= Driver |
||||
Model (SPI Platen Information) |
Ve-120 |
|||
|---|---|---|---|---|
| Injection Unit | ||||
| Calculated Injection Capacity | in3 | 8.85 | 11.05 | 13.55 |
| Actual shot weight-PS | grams | 135 | 169 | 208 |
| Actual shot weight-PS | oz | 4.8 | 6 | 7.3 |
| Calculated Plasticizing Capacity-PS | g/s | 11 | 15 | 20 |
| Injection pressure-Max | Psi | 25572 | 20466 | 16754 |
| Injection rate | in3/sec | 6.28 | 7.81 | 9.58 |
| Screw duameter | in | 1.34 | 1.49 | 1.65 |
| Screw L/D ratio | 22 | 20 | 19 | |
| Screw speed | rpm | 245 | ||
| Screw stroke | in | 6.29 | ||
| Nozzle stroke | in | 11.02 | ||
| Nozzle contact force | U.S. ton | 3.05 | ||
| Total heating wattage | kw | 7.1 | ||
| Clamping Unit | ||||
| Clamping force | U.S. ton | 154 | ||
| Max. Clamping stroke | in | 13.78 | ||
| Max. Open daylight | in | 31.4 | ||
| Min/Max. Mould thickness | in | 4.7 - 17.7 | ||
| Platen dimensions (HXV) | in | 24.4 × 24.4 | ||
| Tie-bar distance(HXV) | in | 16.1 × 16.1 | ||
| Ejector stroke | in | 3.9 | ||
| Ejector force | U.S. ton | 3.63 | ||
| General | ||||
| Pump motor power (Standard) | Hp(kw) | 20 (15) | ||
| Servomotor power (Option ES Model) | kw | 11(M)+15(D) | ||
| Oil tank capacity | litre | 180 | ||
| System pressure-Max | Psi | 1991 | ||
| Machine weight | U.S. ton | 4.73 | ||
| Machine dimension (LxWxH) | in | 173 × 47 × 70 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※ Servomotor (ES model) for optional. (M) = Servomotor (D)= Driver |
||||
