VsP-Series Injection Molding Machines from Victor Taichung

Model	VsP-180
Injection Unit
Injection unit size		G			F
Screw Diameter	mm	36	40	46	46	50	55
Calculated Injection Capacity	com³	163	201	266	332	393	475
Actual Shot weight-PS	g	153	188	249	312	368	445
	oz	5.4	6.6	8.8	11.0	13.0	15.7
Actual Plasticzing Capacity-PS	g/s	20.55	27.50	40.27	26.94	33.61	41.66
Actual Plasticzing Capacity-PS	kg/hr	74.00	99.00	145.00	97.00	121.00	150.00
Injection Pressure-Max.	kgf/com²	2428	1967	1487	2250	1904	1574
Injection rate	com³/sec	181	224	296	195	231	279
Calculated Injection Speed-Max.	mm/sec	178			118
L/D ratio		22.2	20	17.4	21.7	20	18.2
Screw Speed	rpm	391			261
Screw stroke	mm	160			200
Calculated Nozzle contact force	ton	5			5
Total Heating wattage	kw	13.9			22.6
Clamping unit
Clamping Force	ton	180
Tie-Bar distance (HxV)	mm	510 x 510
thickness Min. - Max.	mm	200 - 550
Clamp stroke-Max.	mm	470
Open daylight-Max.	mm	1020
Platen dimensions (HxV)	mm	750 x 724
Ejector stroke	mm	140
Ejector force	ton	5.6
Dry. Cycle time	sec.	3.3
General
Motor (Standard)	HP/ (Kw)	40 / (30)
Servo Motor Pump (ES Option)	kw	20(M)/37(D)
Oil tank capacity	l	280
Hydraulic sys. Pressure	kgf/com²	170
Machine weight	ton	5.4
Machine size (LxWxH)	mm	5268 x 1487 x 2289
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

Model	VsP-180
Injection Unit
Injection unit size		G			F
Screw Diameter	in	14.1	1.57	1.81	1.81	1.96	2.16
Calculated Injection Capacity	in³	9.94	12.2	16.2	20.2	23.9	28.9
Actual Shot weight-PS	g	153	188	249	312	368	445
	oz	5.4	6.6	8.8	11.0	13.0	15.7
Actual Plasticzing Capacity-PS	g/s	20.55	27.50	40.27	26.94	33.61	41.66
Actual Plasticzing Capacity-PS	kg/hr	74.00	99.00	145.00	97.00	121.00	150.00
Injection Pressure-Max.	Psi	30991	27976	21149	32001	27080	22387
Injection rate	in³/sec	11.04	13.67	18.06	11.90	14.09	17.02
Calculated Injection Speed-Max.	in/sec	7			4.64
L/D ratio		22.2	20	17.4	21.7	20	18.2
Screw Speed	rpm	391			261
Screw stroke	in	6.299			7.874
Calculated Nozzle contact force	U.S. ton	5.5			5.5
Total Heating wattage	kw	13.9			22.6
Clamping unit
Clamping Force	U.S. ton	198.4
Tie-Bar distance (HxV)	in	20 x 20
Mold thickness Min. - Max.	in	7.87 - 21.65
Clamp stroke-Max.	in	18.503
Open daylight-Max.	in	40.157
Platen dimensions (HxV)	in	29.52 x 28.5
Ejector stroke	in	5.511
Ejector force	U.S. ton	6.172
Dry. Cycle time	sec.	3.3
General
Motor (Standard)	HP/ (kw)	40 / (30)
Servo Motor Pump (YUKEN ES)	kw	20(M)/37(D)
Oil tank capacity	L	245
Hydraulic sys. Pressure	Psi	2417
Machine weight	U.S. ton	5.952
Machine size (LxWxH)	in	207.4 x 58.54 x 90.11
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.