Model (Euromap Platen Information) |
VαIII-250J |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | mm | 50 | 55 | 63 | ||
| Calculated Injection Capacity | cm3 | 471 | 570 | 748 | ||
| Actual Shot weight - (PS) | g | 443 | 536 | 703 | ||
| oz | 15.6 | 18.9 | 24.8 | |||
| Plastizing capacity | g/s | 32.7 | 40.8 | 55.2 | ||
| Screw L/D ratio | m/m | 22.4 | 20.3 | 17.7 | ||
| MIRLE system | Standard | Injection rate | cm3/s | 314 | 380 | 499 |
| Injection speed | mm/sec | 160 | ||||
| Long holding type | Injection rate | cm3/s | 236 | 285 | 374 | |
| Injection speed | mm/sec | 120 | ||||
| Injection pressure-Max. | kgf/cm2 | 1829 | 1511 | 1151 | ||
| Holding pressure-Max. | kgf/cm2 | 314 | 380 | 499 | ||
| Screw stroke | mm | 240 | ||||
| Screw speed | rpm | 260 | ||||
| Calculated Nozzle contact force | ton | 3 | ||||
| Clamping unit | ||||||
| Clamping force | ton | 250 | ||||
| Clamp stroke - Max. | mm | 520 | ||||
| Mold thickness Min.~Max. | mm | 250-600 | ||||
| Open daylight - Max. | mm | 1120 | ||||
| Tie-Bar distance (H×V) | mm | 610×560 | ||||
| Platen dimensions (H×V) | mm | 885×830 | ||||
| Ejector stroke | mm | 150 | ||||
| Ejector force | ton | 4.5 | ||||
| Dry. Cycle time | sec. | 2.95 | ||||
| General | ||||||
| Total Heating wattage | kw | 18.6 | ||||
| Machine weight | ton | 11500 | ||||
| Machine size (L×W×H) | mm | 6165×1621×2066 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
Model (SPI Platen Information) |
VαIII-250J |
|||||
|---|---|---|---|---|---|---|
| Injection unit | ||||||
| Screw dia. | in | 1.96 | 2.16 | 2.48 | ||
| Calculated Injection Capacity | in3 | 28.8 | 34.8 | 45.7 | ||
| Actual Shot weight - (PS) | g | 443 | 536 | 703 | ||
| oz | 15.6 | 18.9 | 24.8 | |||
| Plastizing capacity | g/s | 32.7 | 40.8 | 55.2 | ||
| Screw L/D ratio | 22.4 | 20.3 | 17.7 | |||
| MIRLE system | Standard | Injection rate | in3/s | 19.2 | 23.2 | 30.4 |
| Injection speed | in/sec | 6.29 | ||||
| Long holding type | Injection rate | in3/s | 14.4 | 17.4 | 22.8 | |
| Injection speed | in/sec | 4.72 | ||||
| Injection pressure-Max. | Psi | 26023 | 21490 | 16370 | ||
| Holding pressure-Max. | Psi | 4466 | 5404 | 7097 | ||
| Screw stroke | in | 9.44 | ||||
| Screw speed | rpm | 260 | ||||
| Calculated Nozzle contact force | U.S. ton | 3.3 | ||||
| Clamping unit | ||||||
| Clamping force | U.S. ton | 275 | ||||
| Clamp stroke - Max. | in | 20.47 | ||||
| Mold thickness Min.~Max. | in | 9.84-23.62 | ||||
| Open daylight - Max. | in | 44.09 | ||||
| Tie-Bar distance (H×V) | in | 24.01×22.04 | ||||
| Platen dimensions (H×V) | in | 34.84×32.67 | ||||
| Ejector stroke | in | 5.9 | ||||
| Ejector force | ton | 4.5 | ||||
| Dry. Cycle time | sec. | 2.95 | ||||
| General | ||||||
| Total Heating wattage | kw | 18.6 | ||||
| Machine weight | U.S. ton | 12.676 | ||||
| Machine size (L×W×H) | in | 242.71×63.81×81.33 | ||||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | ||||||
