Model (Euromap Platen Information) |
VαIII-50D |
||||
|---|---|---|---|---|---|
| Injection unit | |||||
| Screw dia. | mm | 28 | 32 | ||
| Calculated Injection Capacity | cm3 | 62 | 80 | ||
| Actual Shot weight - (PS) | g | 58 | 76 | ||
| oz | 2.0 | 2.7 | |||
| Plastizing capacity | g/s | 9.7 | 14.2 | ||
| Screw L/D ratio | m/m | 22.9 | 20 | ||
| MIRLE system | Standard | Injection rate | cm3/s | 185 | 241 |
| Injection speed | mm/sec | 300 | |||
| Long holding type | Injection rate | cm3/s | 105 | 137 | |
| Injection speed | mm/sec | 170 | |||
| Injection pressure-Max. | kgf/cm2 | 2440 | 1868 | ||
| Holding pressure-Max. | kgf/cm2 | 2074 | 1588 | ||
| Screw stroke | mm | 100 | |||
| Screw speed | rpm | 375 | |||
| Calculated Nozzle contact force | ton | 1.5 | |||
| Clamping unit | |||||
| Clamping force | ton | 50 | |||
| Clamp stroke - Max. | mm | 270 | |||
| Mold thickness Min.~Max. | mm | 150-350 | |||
| Open daylight - Max. | mm | 620 | |||
| Tie-Bar distance (H×V) | mm | 360×310 | |||
| Platen dimensions (H×V) | mm | 505×502 | |||
| Ejector stroke | mm | 70 | |||
| Ejector force | ton | 2 | |||
| Dry. Cycle time | sec. | 1.8 | |||
| General | |||||
| Total Heating wattage | kw | 5.8 | |||
| Machine weight | ton | 2850 | |||
| Machine size (L×W×H) | mm | 3528x1275x1528 | |||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | |||||
Model (SPI Platen Information) |
VαIII-50D |
||||
|---|---|---|---|---|---|
| Injection unit | |||||
| Screw dia. | in | 0.39 | 1.25 | ||
| Calculated Injection Capacity | in3 | 3.8 | 4.9 | ||
| Actual Shot weight - (PS) | g | 58 | 76 | ||
| oz | 2.0 | 2.7 | |||
| Plastizing capacity | g/s | 9.7 | 14.2 | ||
| Screw L/D ratio | 22.9 | 20 | |||
| MIRLE system | Standard | Injection rate | in3/s | 11.3 | 14.7 |
| Injection speed | in/sec | 11.81 | |||
| Long holding type | Injection rate | in3/s | 6.4 | 8.3 | |
| Injection speed | in/sec | 6.69 | |||
| Injection pressure-Max. | Psi | 34704 | 26568 | ||
| Holding pressure-Max. | Psi | 29498 | 22586 | ||
| Screw stroke | in | 3.93 | |||
| Screw speed | rpm | 375 | |||
| Calculated Nozzle contact force | U.S. ton | 1.65 | |||
| Clamping unit | |||||
| Clamping force | U.S. ton | 55 | |||
| Clamp stroke - Max. | in | 10.62 | |||
| Mold thickness Min.~Max. | in | 5.9-13.77 | |||
| Open daylight - Max. | in | 24.4 | |||
| Tie-Bar distance (H×V) | in | 14.17×12.2 | |||
| Platen dimensions (H×V) | in | 19.88×19.76 | |||
| Ejector stroke | in | 2.75 | |||
| Ejector force | ton | 2 | |||
| Dry. Cycle time | sec. | 1.8 | |||
| General | |||||
| Total Heating wattage | kw | 5.8 | |||
| Machine weight | U.S. ton | 3141 | |||
| Machine size (L×W×H) | in | 138.89x50.19x60.15 | |||
| ※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. | |||||
