- Genuine 60° slant bed for minimum distance from Z-axis ball screw to the tool tip so as to reduce the chip built-up.
- Built-in 4-step gearbox inside the headstock further enhances the cutting torque 536.4kg-m at low spindle speed 67 rpm.
- Spindle nose A2-11 with Kitagawa® hydraulic 15" chuck is offered as standard and available with 18"/21"/24" chucks.
- Z-axis ballscrew diameter 50mm.
- Maximum turning length 1650mm.
- Available with C-axis spindle and live tooling by German Sauter® VDI turret.
| 項目 | 單位 | Vturn-46/165 | |
|---|---|---|---|
| 加工範圍 | 床面旋徑 | mm | 820 |
| 標準車削直徑 | mm | 520 | |
| 最大車削直徑 | mm | 730 (528 為 CV) | |
| 鞍架旋徑 | mm | 520 | |
| 兩心間距離 | mm | 1750 | |
| 通過棒材直徑(拉桿通孔直徑) | mm | 115 | |
| 軸向進給 | X 軸行程： -標準刀架 -VDI刀架 -VDI刀架、C軸 |
mm | 365+25 137+303 186+234 - |
| Z軸行程 | mm | 1650 | |
| Y軸行程 | mm | - | |
| 快速進給-X/Z軸 | m/min | 12 / 15 | |
| 快速進給-Y軸 | m/min | - | |
| 進給馬達-X/Z軸 | kW | 3 / 4 (選配 3 / 7) | |
| 進給馬達-Y軸 | kW | - | |
| 切削進給率 | mm/min | 0~1260 | |
| 滾珠螺桿直徑 X 導程 | mm | 36 x P6 (X) 50 x P10 (Z) |
|
| 主軸 | 主軸鼻端(夾頭) | inch | A2-11 (15") |
| 主軸最大轉速 | rpm | 1500 | |
| 主軸馬達功率 | kW | 30 / 37 與變速箱 |
|
| 軸承內徑 | mm | 180 | |
| 主軸內孔徑 | mm | 123 | |
| 刀架 | 刀把數目 | no. | 10 (12 為 CV) |
| 活動刀具數目 | no. | 6 | |
| 外徑刀柄 | mm | 32 | |
| 曲齒聯軸器直徑 | mm | 320 | |
| 最大內孔刀座 | mm | 60 (VDI-50) | |
| 換刀時間(T-T) | sec | 1 | |
| 銑削速度 | rpm | 3000 | |
| 銑削馬達 | kW | 7.0 | |
| 尾座 | 尾座心軸直徑 | mm | 150 |
| 心軸行程 | mm | 150 | |
| 心軸內孔錐度 | MT#5 (live) | ||
| 其他 | 控制器(FANUC) | 0i-T | |
| 電力需求 | KVA | 46 (49 為 CV) | |
| 水箱容量 | L. | 250 | |
| 機器尺寸 | m | 6.2 x 2.5 x 2.5 | |
| 重量 | kg | 12800 |
