Model (Euromap Platen Information) |
Ve-110 |
|||
|---|---|---|---|---|
Injection Unit |
||||
| Calculated Injection Capacity | cm3 | 113 | 145 | 168 |
| Actual shot weight-PS | grams | 105 | 135 | 157 |
| Actual shot weight-PS | oz | 3.7 | 4.8 | 5.5 |
| Calculated Plasticizing Capacity-PS | g/s | 9 | 15 | 18 |
| Injection pressure-Max | kgf/cm2 | 2310 | 2030 | 1604 |
| Injection rate | cm3/sec | 80 | 91 | 115 |
| Screw duameter | mm | 30 | 34 | 38 |
| Screw L/D ratio | 22.5 | 20 | 18 | |
| Screw speed | rpm | 245 | ||
| Screw stroke | mm | 160 | ||
| Nozzle stroke | mm | 255 | ||
| Nozzle contact force | ton | 2.77 | ||
| Total heating wattage | kW | 6.6 | ||
Clamping Unit |
||||
| Clamping force | ton | 110 | ||
| Max. Clamping stroke | mm | 300 | ||
| Max. Open daylight | mm | 700 | ||
| Min/Max. Mould thickness | mm | 100-400 | ||
| Platen dimensions (HXV) | mm | 550x550 | ||
| Tie-bar distance(HXV) | mm | 360x360 | ||
| Ejector stroke | mm | 85 | ||
| Ejector force | ton | 2.8 | ||
General |
||||
| Pump motor power (Standard) | Hp(kw) | 20(15) | ||
| Servomotor power (Option ES Model) | kw | 11(M)+15(D) | ||
| Oil tank capacity | liters | 150 | ||
| System pressure-Max | kgf/cm2 | 140 | ||
| Machine weight | ton | 3.8 | ||
| Machine dimension (LxWxH) | m | 4.2x1.2x1.8 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※ Servomotor (ES Model) for optional. (M) = Servomotor (D)= Driver |
||||
Model (SPI Platen Information) |
Ve-110 |
|||
|---|---|---|---|---|
| Injection Unit | ||||
| Calculated Injection Capacity | in3 | 6.89 | 8.85 | 10.25 |
| Actual shot weight-PS | grams | 105 | 135 | 157 |
| Actual shot weight-PS | oz | 3.7 | 4.8 | 5.5 |
| Calculated Plasticizing Capacity-PS | g/s | 9 | 15 | 18 |
| Injection pressure-Max | Psi | 32855 | 28872 | 22813 |
| Injection rate | in3/sec | 4.88 | 5.55 | 7.01 |
| Screw duameter | in | 1.18 | 1.34 | 1.49 |
| Screw L/D ratio | 22.5 | 20 | 18 | |
| Screw speed | rpm | 245 | ||
| Screw stroke | in | 6.29 | ||
| Nozzle stroke | in | 10.04 | ||
| Nozzle contact force | U.S. ton | 3.05 | ||
| Total heating wattage | kw | 6.6 | ||
| Clamping Unit | ||||
| Clamping force | U.S. ton | 121 | ||
| Max. Clamping stroke | in | 11.81 | ||
| Max. Open daylight | in | 27.5 | ||
| Min/Max. Mould thickness | in | 3.9 - 15.7 | ||
| Platen dimensions (HXV) | in | 21.6 × 21.6 | ||
| Tie-bar distance(HXV) | in | 14.2 × 14.2 | ||
| Ejector stroke | in | 3.3 | ||
| Ejector force | U.S. ton | 3.08 | ||
| General | ||||
| Pump motor power (Standard) | Hp(kw) | 20 (15) | ||
| Servomotor power (Option ES Model) | kw | 11(M)+15(D) | ||
| Oil tank capacity | litre | 150 | ||
| System pressure-Max | Psi | 1991 | ||
| Machine weight | U.S. ton | 3.96 | ||
| Machine dimension (LxWxH) | in | 165 × 47 × 70 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※ Servomotor (ES model) for optional. (M) = Servomotor (D)= Driver |
||||
