Menu Products
VCENTER-AX350 立式五軸加工中心機

立式五軸加工中心機

VCENTER-AX350 (5-axis machining)

    新型Vcenter-AX350透過五軸和工作台整合的升級款,比上一代三軸立式加工中心工作台面上加裝五軸,更降低了工作台高度,加大工件容許負載


    新型Vcenter-AX350擺動工作台(A+C軸)內部使用創新機構- 滾齒凸輪驅動,零背隙五軸工作台保證高加工精度和高傳動效率。


  • 刀具換刀時間只需5.5秒
  • 高阻尼及高剛性
  • 高阻尼及高剛性
  • 高扭力馬達的直結式主軸
  • C軸採滾齒凸輪驅動
  • 排屑模組強化升級
Item   Unit Vcenter-AX350
Travel X axis travel mm 650
Y axis travel mm 480
Z axis travel mm 540
A/C axis travel mm -120 ~ 30 / 360
Distance Spindle center to column mm 539.5
Spindle nose to table surface mm 60 ~ 600
Table Table work area mm Ø350
Dimension of T-slot mm 12H7
Max. table load kg 200
Spindle Spindle taper   BT-40
Spindle motor - cont / 30 / 10min kW 7.5 / 11 / 15
Opt. 15 / 18.5 / -
Spindle speed rpm 12000 (Opt. 15000)
Feed rate Rapid feed rate - X / Y / Z m/min 48 / 48 / 48
36 / 36 / 36
(Heidenhain)
Rapid feed rate - A/C m/min 12 / 14.4
Axis acceleration - X / Y / Z m/sec2 0.5G / 0.5G / 0.75G
Axis feed motor - X / Y / Z kW 4.5 / 4.5 / 5.5
Cutting feedrate by table m/min 10 (Opt. 15)
X ballscrew (dia. x pitch) mm 40 x P12
Y ballscrew mm 40 x P12
Z ballscrew mm 40 x P12
Linear guide width (X / Y / Z) mm 30 / 35 / 35
Tools Max. tool length mm 300
Max. tool weight kg 7
Magazine capacity   24 (Opt. 32)
Max. tool diameter (without adjacent tools) mm 76 (125)
Tool exchange time sec. 2.4 (T-T), 5.4 (C-C)
Pull stud angle deg. 15 (JIS 40P)
Tool selection method   Random
Machine Power requirement kVA 40 (excl. CTS)
Min/Max. air pressure kg/cm2 5.5 ~ 6.5
Coolant tank capacity L 400
Std. NC controller (Fanuc)   0i-MD (10.4")
Floor space requirement (with conveyor) mm 3949 x 2897
Max. machine height mm 2909
Machine weight kg 5900