Page 5 - Vcenter-AX350AX800 (5 axes)

Directly Coupled Spindle (DCS) 15kW / 12000rpm
Spindle motor is directly coupled to the spindle avoiding the vibration resulting
from belt drives thus enhancing the surface finish on components.
12000 rpm spindle speed with high torque output accommodates
both heavy cutting at low rpm and high speed machining.
Oil-air lubrication with filtration system is used for cooling to cool

and lubricate the spindle bearings to ensure maximum service life.
Air curtain is included to constantly provide the spindle with
additional protection to cool and lubricate the spindle bearings to
ensure maximum service life.

Two types of spindle motors meet the power requirement for milling steel and
speed requirement for milling Aluminum.

®
Roller-Cam-Drive Rotary Table Ø350mm (C-axis)
Innovative roller cam mechanism ensures high accuracy less than 15
seconds (0.004 degree).
High rotating speed shortens cycle time and high resistance to tool crash.

Rotary table diameter 350mm with loading capacity 200kg suitable for
loading small and cubic parts.

Chips & Coolant Disposal Upgrade
Two screw type removers removers push swarf or chips continuously to the machine front
further reduces chip accumulation inside machine.
®
High pressure coolants by Grundfos MTH4-40 (5 bars/60Hz) offer strong flow
(150 liters/min) to flush the swarf away.
Large coolant tank minimums heat build-up for higher machining accuracy.

Dual layer design on the machine base and bottom guarding minimize the coolant leakage to
assure a clean and clear working environment.

4