Menu Products
Multi-Tasking Milling & Turning Center VMT-X200

Multi-Tasking Milling & Turning Center

VMT-X200

  • Turning & Milling in one set-up
  • Y-axis travel 260 mm (10.2")
  • Max. turning dimension Ø500 x 1075 mm
  • Turning spindle 4200 rpm / 15* kW with 8" chuck
  • Milling spindle 12000 rpm / 22 kW
  • with HSK-T63 / A63 tooling
  • ATC-40 tools
  • Y-axis travel 260 mm (10.2”)
  • Roller geared B-axis swivel head for high rotating speed with high rigidity
  • Turning spindle 4200 rpm/ 8" chuck and milling spindle 12000 rpm /
    HSK-T63 implement 4+1 axis machining in one set up
Items Unit VMT-X200
Capacity Swing over bed mm 660
Between centers mm 1376
Max. turning length mm 1075
Max. turning diameter mm 500 (tool length 70mm)
Travels X1-axis (upper tool spindle) mm 635 (+510/-125)
Z1-axis (upper tool spindle) mm 1170 (95+1075)
Y-axis (upper tool spindle only) mm 260 (±130)
B-axis deg 240 (-30~+210)
E-axis (tailstock / sub-spindle) mm 1080
Axis feed X1/Z1/Y/E/B-axis feed m/min 36/36/36/24/(30rpm)
X1/Z1/Y/E/B axis motor power kW 5.5 / 7 / 4 / 2.5 / 3
Ball screw dia. x pitch mm X1: 40 x P10,
Z1/Y/E: 40 x P12
Main spindle 1st spindle nose (chuck) inch A2-6 (8”)
1st spindle speed rpm 4200 (opt. 5000)
1st spindle motor power (cont./30 min/15%) kW 15/18.5/22 (high winding)
Spindle bore mm 76
Bearing inside diameter mm 110
Bar capacity mm 52 (opt. 66)
Subspindle (optional) 2nd spindle nose (chuck) inch A2-6 (8”)
2nd spindle speed rpm 4200 (opt. 5000)
2nd spindle motor power (cont./30 min/15%) kW 15/18.5/22 (high winding)
Spindle bore mm 62 (opt. 76)
Bearing inside diameter mm 100 (opt. 110)
Bar capacity mm 52 (opt. 66)
Upper milling  spindle (B-axis milling head) Turret type rpm Milling head with ATC
Continuous indexing resolution: deg.  0.001 (by roller gear)
Max. speed rpm 12000
Milling motor power (cont./30min/25%) kW 15/18.5/22 (high winding)
ATC & tool magazine Tool specification - HSK-T63
Tool capacity - 40
Tool selection - Fixed tool pot number
Max. tool diameter (w/t adjacent tool) mm 90 (125)
Max. tool length mm 300
Max. tool weight kg 7
Tool exchange time sec 2.0 (T-T), 6.0 (C-C)
Tailstock Quill diameter mm NA (digital)
Quill stroke mm NA (digital)
Quill taper   MT-4 (live)
Machine Controller Fanuc 0i-TF Plus (15”, type 0)
Tank capacity L. 300
Floor requirement (incl. chip conveyor) mm 5437 x 3034 x 2906
Power requirement kVA 57 (74)
Net weight kg 12000

Standard accessories:

  • Fanuc 0i-TF PLUS (15", type 0) control with iHMI + AICC + MGI
  • Hydraulic chuck with soft jaws
  • Chip conveyor with cart
  • Automatic Tool Presetter (Renishaw®) for milling spindle
  • Coolant flush to the bottom of Z-axis covers by Walrus pump TPHK 4T4-4 (4 bars/60Hz)
  • Coolant ring around milling spindle with high pressure coolant (4 bars/60Hz)  by Walrus® pump TPHK 4T4-4)
  • Coolants through milling spindle (7 bars/60Hz) for high pressure turning
  • Digital tailstock
  • LHL (Lube Hybrid Lubrication) system
  • Spindle oil cooler
  • Fully enclosed splash guarding
  • Hand-wheel (Pulse generator)
  • 3 step warning light
  • Handy air gun

Optional accessories:

  • 2nd spindle (right spindle)
  • KITAGAWA® hydraulic chuck
  • Hard jaws
  • Coolant Through Spindle (CTS)
  • Steady rest
  • High pressure coolants
  • Bar feeder interface
  • Robotic parts catcher
  • Hand-wheel (remote MPG)
  • Air blow system
  • Auto door
  • Fanuc manuals
  • Oil skimmer (not required because of LHL lube system.)
  • Fanuc 31i-B5 Plus control for 5-axis simultaneous machining
  • Test bar for accuracy calibration
  • Coolant gun