Menu Products
Horizontal Machining Centers VTURN II-16/20

Horizontal Turning Center

VTURN II-16/20

  • Increased rigidity using one piece casting with integral box-ways!
  • Increased productivity using servo-driven turrets and fast traverse rate!
  • Increased angular accuracy using DDS spindle for C axis and live tooling!
  • Increased performance using Fanuc 0i-T control with color graphics!
  • Rear chip disposal is available
ITEM \ MODEL   Unit VturnII-16
VturnII-20
VturnII-16CV
VturnII-20CV
Capacity Swing over bed mm 590 590
Swing over carriage mm 400 400
Between centers mm 540 540
Max. turning dia. mm 440 330
Std. Turning dia. mm 370
360
270
Bar capacity mm 40
52 (Opt. 66)
40
52
Travels X axis stroke mm 220 + 20 135 + 105
Z axis stroke mm 510 510
B axis stroke mm - -
Y axis stroke mm - -
Spindle Max. spindle speed rpm 6000
4200
6000
4200
Spindle nose (chuck) Inch A2-5 (6")
A2-6 (8")
A2-5 (6")
A2-6 (8")
Spindle bore mm 52
62
52
62
Spindle indexing deg - 0.001
Bearing inside dia. mm 90
100
90
100
Sub-spindle
(B axis)
Max. spindle speed rpm - -
Spindle nose (chuck) Inch - -
Spindle bore mm - -
Spindle indexing deg - -
Bearing inside dia. mm - -
Turret No. of tools no. 12
10 (Opt. 8)
12
No. of live tools no. - 12
Tool shank size mm 20
25
20
25
Max. boring bar dia. mm 32 (VDI-30)
40 (VDI-30)
VDI-30
Exchange time (T-T) sec 0.2 0.2
Milling speed rpm - 3000
Tailstock Quill dia. mm 75 75
Quill taper   MT#4 MT#4
Quill stroke mm 80 80
Feedrate Rapid feedrate mm/min X:20000 / Z:2400 X:20000 / Z:2400
Cutting feedrate mm/min X/Z=0~1260 X/Z=0~1260
Motor Spindle motor kW 11/15 a B160Mi - 5.5/7.5
a B180Mi - 11/15
Sub-spindle motor kW - -
Servo motor kW X: 1.6, Z: 3.0 X: 1.6, Z: 3.0
Milling motor kW - -
Controller FANUC   0i-T 0i-T
Coolant Tank capacity L. 130 130
Machine L x W x H mm 2300 x 1685 x 1700 2300 x 1685 x 1700
Net weight kg 4200 4300
※Machine and controller specifications are subject to change without notice