- Genuine 45° one piece slant bed for maximal structure rigidity.
- Maximum turning length 4250mm !
- Rapid feed rate 20/20m/min (for Vture-40/220 & Vture-45/220) .
- Spindle power 37kW by Fanuc α30/6000i motor.
- Z-axis ballscrew diameter 50(63)[70] mm for Vturn-40/220(325)[425].
- Box slideways with hardness HRC 55 for heavy cutting.
- 2-step gearbox is included to further enhance the cutting torque at low rpm.
- Bar capacity : 91mm for Vturn-40, 117.5mm for Vturn-45.
ITEM \ MODEL | Unit | Vturn-40/220(Y) Vturn-40/325(Y) Vturn-40/425(Y) |
Vturn-45/220 Vturn-45/320 Vturn-45/425 |
|
---|---|---|---|---|
MACHINE CAPACITY | Swing over bed | mm | 780 | 780 |
Std. Turning dia. | mm | 520 | 520 | |
Max. turning dia. | mm | 620 (390 for CV) |
620 | |
Swing over carriage | mm | 620 | 620 | |
Center distance | mm | 2165 3425 4285 |
2165 3425 4285 |
|
Hole through draw bar | mm | 91 | 117.5 (145 for LSB) | |
AXIS FEEDS | X axis travel : -Std turret -VDI turret -VDI turret, C-axis |
mm |
310+30 125+215 107+165 280+90 |
310+30 125+315 |
Z axis travel | mm | 2200 3250 4250 |
2200
3250 |
|
Rapid feed - X/Z axis | m/min | 20/20 20/12 20/8 |
20/20 20/12 |
|
Feed motor - X/Z axis | kW | 4 / 7 (@30i_30Nm) 4 / 6 (@40_38Nm) |
4 / 7 (@30i_30Nm) 4 / 6 (@40_38Nm) |
|
JOG feed rate | mm/min | 0~1260 | 0~1260 | |
Ball screw dia x pitch | mm | 36 x P10 (X) 50 x P16 (Z) 63 x P16 (Z) 70 x P12 (Z) 32 x P8 (Y) |
36 x P10 (X) 50 x P16 (Z) 63 x P16 (Z) 70 x P12 (Z) |
|
SPINDLE | Spindle nose (chuck) | inch | A2-11 (15") | A2-11 (15") |
Max. spindle speed | rpm | 2500 | 2000 1500 (LSB) |
|
Spindle motor power | kW | 30/37 with gearbox (37/45 CV) |
30 / 37 With gearbox |
|
Bearing inside dia. | mm | 160 | 190 (220 for LSB) | |
Spindle bore | mm | 105 | 135 (160 for LSB) | |
TURRET | No. of tools | no. | 10 (opt. 12) (12 for CV) |
10 (opt. 12) |
No. of live tools | no. | 6 | - | |
Tool shank size | mm | 32 | 32 | |
Curvic coupling dia. (mm) | mm | 250 | 250 320 |
|
Max. boring bar dia. | mm | 50 (VDI-50) | 50 | |
Exchange time (T-T) | sec | 1 | 1 | |
Milling speed | rpm | 2500 | - | |
Milling motor | kW | 7.0 | - | |
TAILSTOCK | Quill dia. | mm | 150 | 150 |
Quill stroke | mm | 150 | 150 | |
Quill taper | MT#5 (live) | MT#5 (live) | ||
OTHER | CNC controller (FANUC) | 0i-T (10.4”) | 0i-T (10.4”) | |
Tank capacity | L. | 450 700 1000 |
450 700 1000 |
|
Approx. machine size | m | 7.1 x 2.7 x 2.2 8.5 x 2.7 x 2.2 9.5 x 2.7 x 2.2 |
7.1 x 2.7 x 2.2 8.5 x 2.7 x 2.2 9.5 x 2.7 x 2.2 |
|
Net weight | kg | 15000 17000 19500 |
15580 17580 20000 |
※Machine and controller specifications are subject to change without notice