Menu Products
Vertical Machining Centers VCENTER-102E

With a powerful controller to satisfy your repeatability requirements

Vs-50 Tons / Vs-80 Tons / Vs-100 Tons / Vs-130 Tons / Vs-180 Tons / Vs-250 Tons

Designed for your universal processing applications, this series of machinery is fast, accurate and has excellent repeatability. With two controllers to choose from and standard proportional a flow control, this Victor injection-moulding machine can help you reach a maximum productibility, using a wide range of materials.
  • High Precision Injection Unit
  • Heavy Duty, Rigid, Clamping Unit
  • Energy Saving, Precision Hydraulic System
  • The V-8000C Semi-Closed Loop Controller
  • The advanced controller V-8000C series

Vs-Series - All model (Euromap Platen Information)

Model
VS-50S
VS-50K
VS-80S

Injection Unit

Calculated Injection capacity cm3 38 49 62 80 102 38 49
Actual shot weight -PS  g 36 46 58 76 95 36 46
Actual shot weight  oz 1.3 1.6 2 2.7 3.4 1.3 1.6
Calculated Plasticizing Capacity - PS  g/s 6 9 12 17 24 6 9
Injection pressure-Max.  kgf/cm2 3012 2332 2634 2017 1594 3012 2332
Injection rate cm3/sec   52 68 85 111 140 67 86
Calculated Injection speed - Max. mm/sec 137 137 137 137 137 176 176
Screw diameter mm 22 25 28 32 36 22 25
Screw L/D ratio   22 20 23 20 18 22 20
Screw Speed rpm 400 375 400
Screw stroke mm 100 100 100
Nozzle stroke mm 200 245 200
Nozzle contact force ton 5 5 5
Total heating wattage Kw 5.25 5.8 5.25

Clamping Unit

Clamping force ton 50 50 80
Clamp stroke-Max.    mm 270 270 320
Open daylight-Max.   mm 590 590 670
Mold thickness Min.-Max.  mm 150-320 150-320 150-350
Platen dimensions(HxV) mm 446x446 446x446 540x510
Tie-Bar distance(HxV) mm 310x310 310x310 360x360
Ejector stroke mm 60 60 80
Ejector force ton 3.3 3.3 4

General

Motor (Standard)  HP(Kw) 20(15) 20(15) 25(18.5)
Servo motor (ES Option)  Kw 11 11 15
Oil tank capacity   L 150 150 165
Hydraulic sys. Pressure Kg/cm2   170 170 170
Machine weight  ton  2.8 2.8 3.3
Machine size (LxWxH)   mm 3700x1090x1900 3700 x 1090 x 1900 3900x1135x1900
Machine size (LxWxH) ES mm 4030x1090x1900 4030 x 1090 x 1900 4230x1135x1900
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VS-80K
VS-80H
VS-100K

Injection Unit

Calculated Injection capacity cm3 62 80 102 104 132 163 62 80 102
Actual shot weight -PS  g 58 75 95 98 124 153 58 75 95
Actual shot weight  oz 2 2.7 3.4 3.5 4.4 5.4 2 2.7 3.4
Calculated Plasticizing Capacity - PS  g/s 12 18 24 11 15 20 12 18 24
Injection pressure-Max.  kgf/cm2 2634 2017 1594 2490 1967 1594 2634 2017 1594
Injection rate cm3/sec   109 142 179 115 145 179 109 142 179
Calculated Injection speed - Max. mm/sec 176 176 176 142 142 142 176 176 176
Screw diameter mm 28 32 36 32 36 40 28 32 36
Screw L/D ratio   23 20 18 22.5 20 18 23 20 18
Screw Speed rpm 375 279 375
Screw stroke mm 100 130 100
Nozzle stroke mm 245 260 245
Nozzle contact force ton 5 5 5
Total heating wattage Kw 5.8 6.8 5.8

Clamping Unit

Clamping force ton 80 80 100
Clamp stroke-Max.    mm 320 320 360
Open daylight-Max.   mm 670 670 790
Mold thickness Min.-Max.  mm 150-350 150-350 150-430
Platen dimensions(HxV) mm 540x510 540x510 580x580
Tie-Bar distance(HxV) mm 360x360 360x360 410x410
Ejector stroke mm 80 80 80
Ejector force ton 4 4 4

General

Motor (Standard)  HP(Kw) 25(18.5) 25(18.5) 25(18.5)
Servo motor (ES Option)  Kw 15 15 15
Oil tank capacity   L 165 165 165
Hydraulic sys. Pressure Kg/cm2   170 170 170
Machine weight  ton  3.3 3.3 3.9
Machine size (LxWxH)   mm 3900 x 1135 x 1900 3900 x 1135 x 1900 4200 x 1180 x 1920
Machine size (LxWxH) ES mm 4230 x 1135 x 1900 4230 x 1135 x 1900 4530 x 1180 x 1920
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
MODEL
VS-100H
VS-100M
VS-130M

Injection Unit

Calculated Injection capacity cm3 104 132 163 116 147 182 116 147 182
Actual shot weight -PS  g 98 124 153 109 138 171 109 138 171
Actual shot weight  oz 3.5 4.4 5.4 3.9 4.9 6 3.9 4.9 6
Calculated Plasticizing Capacity - PS  g/s 11 15 20 11 16 21 14 20 26
Injection pressure-Max.  kgf/cm2 2490 1967 1594 2490 1967 1594 2490 1967 1594
Injection rate cm3/sec   115 145 179 115 145 179 136 172 213
Calculated Injection speed - Max. mm/sec 142 142 142 142 142 142 169 169 169
Screw diameter mm 32 36 40 32 36 40 32 36 40
Screw L/D ratio   22.5 20 18 22.5 20 18 22.5 20 18
Screw Speed rpm 279 279 332
Screw stroke mm 130 145 145
Nozzle stroke mm 260 300 300
Nozzle contact force ton 5 5 5
Total heating wattage Kw 6.8 6.8 6.8

Clamping Unit

Clamping force ton 100 100 130
Clamp stroke-Max.    mm 360 360 400
Open daylight-Max.   mm 790 790 850
Mold thickness Min.-Max.  mm 150-430 150-430 150-450
Platen dimensions(HxV) mm 580x580 580x580 630x630
Tie-Bar distance(HxV) mm 410x410 410x410 460x460
Ejector stroke mm 80 80 80
Ejector force ton 4 4 4

General

Motor (Standard)  HP(Kw) 25(18.5) 25(18.5) 30(22.0)
Servo motor (ES Option)  Kw 15 15 18.5
Oil tank capacity   L 165 165 215
Hydraulic sys. Pressure Kg/cm2   170 170 170
Machine weight  ton  3.9 3.9 5
Machine size (LxWxH)   mm 4200 x 1180 x 1920 4200 x 1180 x 1920 4700 x 1180 x 2020
Machine size (LxWxH) ES mm 4530 x 1180 x 1920 4530 x 1180 x 1920 5030 x 1180 x 2020
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
MODEL
VS-130G
VS-180G
VS-180F

Injection Unit

Calculated Injection capacity cm3 181 201 266 181 121 266 332 393 475
Actual shot weight -PS  g 170 188 249 170 188 249 312 368 445
Actual shot weight  oz 6 6.7 8.8 6 6.7 8.8 11 13 15.7
Calculated Plasticizing Capacity - PS  g/s 20 23 33 25 29 43 31 38 47
Injection pressure-Max.  kgf/cm2 2179 1967 1487 2179 1967 1487 2250 1904 1574
Injection rate cm3/sec   156 173 228 201 222 294 195 230 278
Calculated Injection speed - Max. mm/sec 137 137 137 177 177 177 117 117 117
Screw diameter mm 38 40 46 38 40 46 46 50 55
Screw L/D ratio   21 20 17.5 21 20 17.5 22 20 18
Screw Speed rpm 283 364 260
Screw stroke mm 160 160 200
Nozzle stroke mm 340 340 380
Nozzle contact force ton 5 5 5
Total heating wattage Kw 8.02 8.02 12.9

Clamping Unit

Clamping force ton 130 180 180
Clamp stroke-Max.    mm 400 470 470
Open daylight-Max.   mm 850 970 970
Mold thickness Min.-Max.  mm 150-450 200-500 200-500
Platen dimensions(HxV) mm 630x630 720x720 720x720
Tie-Bar distance(HxV) mm 460x460 510x510 510x510
Ejector stroke mm 80 140 140
Ejector force ton 4 5.6 5.6

General

Motor (Standard)  HP(Kw) 30(22.0) 40(30) 40(30)
Servo motor (ES Option)  Kw 18.5 22 22
Oil tank capacity   L 215 245 245
Hydraulic sys. Pressure Kg/cm2   170 170 170
Machine weight  ton  5 5.9 5.9
Machine size (LxWxH)   mm 4700 x 1180 x 2020 5400 x 1180 x 2050 5400 x 1180 x 2050
Machine size (LxWxH) ES mm 5030 x 1180 x 2020 5780 x 1180 x 2050 5780 x 1180 x 2050
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
MODEL
VS-250F
VS-250E

Injection Unit

Calculated Injection capacity cm3 332 393 475 570 679 872
Actual shot weight -PS  g 312 368 445 534 636 817
Actual shot weight  oz 11 13 15.7 18.9 22.4 28.8
Calculated Plasticizing Capacity - PS  g/s 37 46 58 34 43 57
Injection pressure-Max.  kgf/cm2 2250 1904 1574 2065 1735 1351
Injection rate cm3/sec   238 281 341 260 309 397
Calculated Injection speed - Max. mm/sec 153 153 153 116 116 116
Screw diameter mm 46 50 55 55 60 68
Screw L/D ratio   22 20 18 22 20 18
Screw Speed rpm 340 203
Screw stroke mm 200 240
Nozzle stroke mm 380 450
Nozzle contact force ton 5 7.9
Total heating wattage Kw 12.9 18.3

Clamping Unit

Clamping force ton 250 250
Clamp stroke-Max.    mm 580 580
Open daylight-Max.   mm 1130 1130
Mold thickness Min.-Max.  mm 250-550 250-550
Platen dimensions(HxV) mm 820x820 820x820
Tie-Bar distance(HxV) mm 610x610 610x610
Ejector stroke mm 170 170
Ejector force ton 8.5 8.5

General

Motor (Standard)  HP(Kw) 50(37.0) 50(37.0)
Servo motor (ES Option)  Kw 15 + 15 15 + 15
Oil tank capacity   L 450 450
Hydraulic sys. Pressure Kg/cm2   170 170
Machine weight  ton  9.9 9.9
Machine size (LxWxH)   mm 6850 x 1660 x 2210 6850 x 1660 x 2210
Machine size (LxWxH) ES mm 7290 x 1660 x 2210 7290 x 1660x 2210
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

Vs-Series - All model (SPI Platen Information)

Model
VS-50S
VS-50K
VS-80S

Injection Unit

Calculated Injection capacity in3 2.3 2.9 3.7 4.8 6.2 2.3 2.9
Actual shot weight -PS  g 36 46 58 76 95 36 46
Actual shot weight  oz 1.3 1.6 2 2.7 3.4 1.3 1.6
Calculated Plasticizing Capacity - PS  g/s 6 9 12 17 24 6 9
Injection pressure-Max.  Psi 42839 33168 37463 28687 22671 42839 33168
Injection rate in3/sec   3.1 4.1 5.1 6.7 8.5 4 5.2
Calculated Injection speed - Max. in/sec 5.39 5.39 5.39 5.39 5.39 6.9 6.9
Screw diameter in 0.86 0.98 1.1 1.25 1.41 0.86 0.98
Screw L/D ratio   22 20 23 20 18 22 20
Screw Speed rpm 400 375 400
Screw stroke in 3.93 3.93 3.93
Nozzle stroke in 7.87 9.64 7.87
Nozzle contact force U.S. ton 5.5 5.5 5.5
Total heating wattage Kw 5.25 5.8 5.25

Clamping Unit

Clamping force U.S. ton 55 55 88
Clamp stroke-Max.    in 10.62 10.62 12.59
Open daylight-Max.   in 23.22 23.22 26.37
Mold thickness Min.-Max.  in 5.9 - 12.59 5.9 - 12.59 5.9 - 13.77
Platen dimensions(HxV) in 17.55 x 17.55 17.55 x 17.55 21.25 x 20.07
Tie-Bar distance(HxV) in 12.2 x 12.2 12.2 x 12.2 14.17 x 14.17
Ejector stroke in 2.36 2.36 3.14
Ejector force U.S. ton 3.6 3.6 4.4

General

Motor (Standard)  HP(Kw) 20(15) 20(15) 25(18.5)
Servo motor (ES Option)  Kw 11 11 15
Oil tank capacity   L 150 150 165
Hydraulic sys. Pressure Kg/in2   2417 2417 2417
Machine weight  U.S. ton  3.08 3.08 3.63
Machine size (LxWxH)   in 145x43x75 145x43x75 154x45x75
Machine size (LxWxH) ES in 159x43x75 159x43x75 167x45x75
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VS-80K
VS-80H
VS-100K

Injection Unit

Calculated Injection capacity in3 3.7 4.8 6.2 6.3 8 9.9 3.7 4.8 6.2
Actual shot weight -PS  g 58 75 95 98 124 153 58 75 95
Actual shot weight  oz 2 2.7 3.4 3.5 4.4 5.4 2 2.7 3.4
Calculated Plasticizing Capacity - PS  g/s 12 18 24 11 15 20 12 18 24
Injection pressure-Max.  Psi 37463 28687 22671 35415 27976 22671 37463 28687 22671
Injection rate in3/sec   6.6 8.6 10.9 7 8.8 10.9 6.6 8.6 10.9
Calculated Injection speed - Max. in/sec 6.9 6.9 6.9 5.59 5.59 5.59 6.92 6.92 6.92
Screw diameter in 1.1 1.25 1.41 1.25 1.41 1.57 1.1 1.25 1.41
Screw L/D ratio   23 20 18 22.5 20 18 23 20 18
Screw Speed rpm 375 279 375
Screw stroke in 3.93 5.11 3.93
Nozzle stroke in 9.64 10.23 9.64
Nozzle contact force U.S. ton 5.5 5.5 5.5
Total heating wattage Kw 5.8 6.8 5.8

Clamping Unit

Clamping force U.S. ton 88 88 110
Clamp stroke-Max.    in 12.59 12.59 14.17
Open daylight-Max.   in 26.37 26.37 31.1
Mold thickness Min.-Max.  in 5.9 - 13.77 5.9 - 13.77 5.9 - 16.92
Platen dimensions(HxV) in 21.25 x 20.07 21.25 x 20.07 22.83 x 22.83
Tie-Bar distance(HxV) in 14.17 x 14.17 14.17 x 14.17 16.14 x 16.14
Ejector stroke in 3.14 3.14 3.14
Ejector force U.S. ton 4.4 4.4 4.4

General

Motor (Standard)  HP(Kw) 25(18.5) 25(18.5) 25(18.5)
Servo motor (ES Option)  Kw 15 15 15
Oil tank capacity   L 165 165 165
Hydraulic sys. Pressure Kg/in2   2417 2417 2417
Machine weight  U.S. ton  3.63 3.63 4.29
Machine size (LxWxH)   in 154x45x75 154x45x75 165x46x76
Machine size (LxWxH) ES in 167x45x75 167x45x75 178x46x76
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VS-100H
VS-100M
VS-130M

Injection Unit

Calculated Injection capacity in3 6.3 8 9.9 7 8.9 11.1 7 8.9 11.1
Actual shot weight -PS  g 98 124 153 110 138 171 109 138 171
Actual shot weight  oz 3.5 4.4 5.4 3.9 4.9 6 3.9 4.9 6
Calculated Plasticizing Capacity - PS  g/s 11 15 20 11 16 21 14 20 26
Injection pressure-Max.  Psi 35415 27976 22671 37463 27976 22671 35415 27976 22671
Injection rate in3/sec   7 8.8 10.9 7 8.8 10.9 8.2 10.4 12.9
Calculated Injection speed - Max. in/sec 5.59 5.59 5.59 5.59 5.59 5.59 6.65 6.65 6.65
Screw diameter in 1.25 1.41 1.57 1.25 1.41 1.57 1.25 1.41 1.57
Screw L/D ratio   22.5 20 18 22.5 20 18 22.5 20 18
Screw Speed rpm 279 279 332
Screw stroke in 5.11 5.7 5.7
Nozzle stroke in 11.81 11.81 11.81
Nozzle contact force U.S. ton 5.5 5.5 5.5
Total heating wattage Kw 6.8 6.8 6.8

Clamping Unit

Clamping force U.S. ton 110 110 143
Clamp stroke-Max.    in 14.17 14.17 15.74
Open daylight-Max.   in 31.1 31.1 33.46
Mold thickness Min.-Max.  in 5.9 - 16.92 5.9 - 16.92 5.9 - 17.71
Platen dimensions(HxV) in 22.83 x 22.83 22.83 x 22.83 24.8 x 24.8
Tie-Bar distance(HxV) in 16.14 x 16.14 16.14 x 16.14 18.11 x 18.11
Ejector stroke in 3.14 3.14 3.14
Ejector force U.S. ton 4.4 4.4 4.4

General

Motor (Standard)  HP(Kw) 25(18.5) 25(18.5) 30(22.0)
Servo motor (ES Option)  Kw 15 15 18.5
Oil tank capacity   L 165 165 215
Hydraulic sys. Pressure Kg/in2   2417 2417 2417
Machine weight  U.S. ton  4.29 4.29 5.5
Machine size (LxWxH)   in 165x46x76 165x46x76 185x47x80
Machine size (LxWxH) ES in 178x46x76 178x46x76 198x47x80
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VS-130G
VS-180G
VS-180F

Injection Unit

Calculated Injection capacity in3 11 12.2 16.2 11 12.2 16.2 20.2 23.9 28.9
Actual shot weight -PS  g 170 188 249 170 188 249 312 368 445
Actual shot weight  oz 6 6.7 8.8 6 6.7 8.8 11 13 15.7
Calculated Plasticizing Capacity - PS  g/s 20 23 33 25 29 43 31 38 47
Injection pressure-Max.  Psi 30991 27976 21149 30991 27976 21149 32001 27080 22387
Injection rate in3/sec   9.5 10.5 13.9 12.2 13.5 17.9 11.9 14 16.9
Calculated Injection speed - Max. in/sec 5.39 5.39 5.39 6.96 6.96 6.96 4.6 4.6 4.6
Screw diameter in 1.49 1.57 1.81 1.49 1.57 1.81 1.81 1.96 2.16
Screw L/D ratio   21 20 17.5 21 20 17.5 22 20 18
Screw Speed rpm 283 364 260
Screw stroke in 6.29 6.29 7.87
Nozzle stroke in 13.38 13.38 14.96
Nozzle contact force U.S. ton 5.5 5.5 5.5
Total heating wattage Kw 8.02 8.02 12.9

Clamping Unit

Clamping force U.S. ton 143 198 198
Clamp stroke-Max.    in 15.74 18.5 18.5
Open daylight-Max.   in 33.46 38.18 38.18
Mold thickness Min.-Max.  in 5.9 - 17.71 7.87 - 19.68 7.87 - 19.68
Platen dimensions(HxV) in 24.8 x 24.8 28.34 x 28.34 28.34 x28.34
Tie-Bar distance(HxV) in 18.11 x 18.11 20.07 x 20.07 20.07 x 20.07
Ejector stroke in 3.14 5.51 5.51
Ejector force U.S. ton 4.4 6.1 6.1

General

Motor (Standard)  HP(Kw) 30(22.0) 40(30) 40(30)
Servo motor (ES Option)  Kw 18.5 22 22
Oil tank capacity   L 215 245 245
Hydraulic sys. Pressure Kg/in2   2417 2417 2417
Machine weight  U.S. ton  5.5 6.5 6.5
Machine size (LxWxH)   in 185x47x80 212x47x80 212x47x80
Machine size (LxWxH) ES in 198x47x80 227x47x80 227x47x80
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VS-250F
VS-250E

Injection Unit

Calculated Injection capacity in3 20.2 23.9 28.9 34.7 41.4 53.2
Actual shot weight -PS  g 312 368 445 534 636 817
Actual shot weight  oz 11 13 15.7 18.9 22.4 28.8
Calculated Plasticizing Capacity - PS  g/s 37 46 58 34 43 57
Injection pressure-Max.  Psi 32001 27080 22387 29370 24676 19215
Injection rate in3/sec   14.5 17.1 20.8 15.8 18.8 24.2
Calculated Injection speed - Max. in/sec 6.02 6.02 6.02 4.56 4.56 4.56
Screw diameter in 1.81 1.96 2.16 2.16 2.36 2.67
Screw L/D ratio   22 20 18 22 20 18
Screw Speed rpm 340 203
Screw stroke in 7.87 9.44
Nozzle stroke in 14.96 17.71
Nozzle contact force U.S. ton 5.5 8.7
Total heating wattage Kw 12.9 18.3

Clamping Unit

Clamping force U.S. ton 275 275
Clamp stroke-Max.    in 22.83 22.83
Open daylight-Max.   in 44.48 44.48
Mold thickness Min.-Max.  in 9.84 - 21.65  9.84 - 21.65
Platen dimensions(HxV) in 32.28 x 32.28 32.28 x 32.28
Tie-Bar distance(HxV) in 24.01 x 24.01 24.01 x 24.01
Ejector stroke in 6.69 6.69
Ejector force U.S. ton 9.3 9.3

General

Motor (Standard)  HP(Kw) 50(37.0) 50(37.0)
Servo motor (ES Option)  Kw 15 + 15 15 + 15
Oil tank capacity   L 450 450
Hydraulic sys. Pressure Kg/in2   2417 2417
Machine weight  U.S. ton  10.9 10.9
Machine size (LxWxH)   in 270x65x87 270x65x87
Machine size (LxWxH) ES in 287x65x87 287x65x87
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.