Menu Products
Vertical Machining Centers VCENTER-102E

VICTOR Vr Series Front Running Performance

Vr-50 Tons / Vr-80 Tons / Vr-100 Tons / Vr-130 Tons / Vr-180 Tons / Vr-250 Tons

In today's increasingly competitive plastics processing industry, being first past the post is never easy. Therefore we introduce the new Vr-series, a precision built injection machine range. Each model is designed from the ground up to give productivity and quality, without the headaches.
  • High Precision Reliable Injection Unit
  • Reliable Rigid Clamping Unit
  • Precision Hydraulic Unit
  • The V-8000 with Semi-closed Loop Control

Vr-ce Series - All model (Euromap Platen Information)

Model
Vr-50
Vr-80
Vr-100

Injection Unit

Calculated Injection Capacity cm3 60 80 102 104 132 163 116 147 182
Actual shot weight PS grams 58 76 97 99 125 155 110 139 173
Plasticizing capacity kg/hr 40 54 68 50 64 75 50 64 75
Injection pressure-Max kgf/cm2 2635 2023 1594 2648 2092 1694 2648 2092 1694
Injection rate cm3/sec 89 116 147 109 138 170 109 138 170
Screw duameter mm 28 32 36 32 36 40 32 36 40
Screw L/D ratio   22 20.5 18 22 20.5 18 22 20.5 18
Screw speed rpm 10-400 10-285 10-285
Injection speed mm/sec 145 125 125
Suck back force ton 2 1.7 1.7
Screw stroke mm 100 130 145
Screw motor torque kgm 69 100 100
Nozzle stroke mm 245 260 300
Nozzle contact force ton 5 5 5
Temp. Control zones no. 4 4 4
Total heating wattage Kw 5.1 6.15 6.5

Clamping Unit

Clamping force ton 50 80 100
Clamping system type Toggle Toggle Toggle
Max. Clamp stroke mm 270 320 360
Max. Open daylight mm 590 670 790
Mould close speed mm/sec 712 470 353
Mould open speed mm/sec 1100 665 550
Locatingring mm 100/125 100/125 100/125
Min/Max mould thickness mm 150-320 150-350 150-430
Platen dimensions (HxV) mm 446x446 510x510 580x580
Tie-Bar distance(HxV) mm 310x310 360x360 40x410
Tie-Bar diameter mm 50 60 65
Ejector stroke mm 60 80 80
Ejector force ton 3.3 4.1 4.1

General

Pump motor power Kw 15 18.5 18.5
Pump output vol. l/min 200 220 220
Cooling water regulator l/min 30 30 30
Oiltank capacity litre 230 250 250
Hydraulic sys.pressure kgf/cm2 170 170 170
Machine weight ton 2.7 3.9 4.8
Machine dimensions (LxWxH) cm 386x116x222 407x124x227 434x132x234
* Specifications, technical information and dimensions are subject to charge without prior notice.
Model
Vr-130
Vr-180
Vr-250

Injection Unit

Calculated Injection Capacity cm3 180 200 265 332 392 475 570 678 871
Actual shot weight PS grams 171 190 250 315 372 451 541 644 827
Plasticizing capacity kg/hr 77 86 115 111 154 191 166 198 252
Injection pressure-Max kgf/cm2 2180 1967 1487 2250 1904 1574 2065 1735 1351
Injection rate cm3/sec 132 147 196 152 181 217 283 336 432
Screw duameter mm 38 40 46 46 50 55 55 60 68
Screw L/D ratio   217 20.5 18 22 20 18 22 20.5 18
Screw speed rpm 10-280 10-200 10-200
Injection speed mm/sec 138 91 109
Suck back force ton 5 5 8.4
Screw stroke mm 160 200 240
Screw motor torque kgm 95 160 210
Nozzle stroke mm 340 380 450
Nozzle contact force ton 5 5 7.9
Temp. Control zones no. 4 4 4
Total heating wattage Kw 7.1 11.1 15.5

Clamping Unit

Clamping force ton 130 180 250
Clamping system type Toggle Toggle Toggle
Max. Clamp stroke mm 400 470 580
Max. Open daylight mm 850 970 1130
Mould close speed mm/sec 399 356 445
Mould open speed mm/sec 764 707 834
Locatingring mm 100/125 100/125 150/160
Min/Max mould thickness mm 150-450 200-500 250-550
Platen dimensions (HxV) mm 630x630 720x720 820x820
Tie-Bar distance(HxV) mm 460x460 510x510 610x610
Tie-Bar diameter mm 70 85 100
Ejector stroke mm 80 140 170
Ejector force ton 4.1 5.6 8.5

General

Pump motor power Kw 22 22 37
Pump output vol. l/min 330 330 450
Cooling water regulator l/min 30 30 50
Oiltank capacity litre 290 290 400
Hydraulic sys.pressure kgf/cm2 170 170 170
Machine weight ton 5.4 6.2 9.6
Machine dimensions (LxWxH) cm 464x143x232 553x148x248 624x176x249
* Specifications, technical information and dimensions are subject to charge without prior notice.