Menu Products
Vertical Machining Centers VCENTER-102E

Energy Saving From Vα All-Electric

Vα-50 Tons / Vα-80 Tons / Vα-100 Tons / Vα-150 Tons / Vα-200 Tons

  1. All-electric machines dramatically reduce operating costs, using 50 - 80 percent less power than equivalent hydraulic machines. Connected power requirements for an electric mactine are 30% those of a hydraulic machine. Furthermore factory equipment cost is saved (such as air conditioning, cooling water etc.) and also low noise levels improve plant environment.
  2. Cooling water usage saving to 1/5 or less of the hydraulic machine.
  3. No hydraulic oil.
  4. Thanks to a smart regenerative power module, the braking energy recovery during clamp deceleration and other functions. This power is stored and re-used.
  • Energy Saving From Vα All Electric
  • High Productivity
  • Precision Shot Control
  • Core Technology
  • Reliable, Durable Mechanical Units
  • Simple Friendly Operation

Vα-SeriesII - All model (Euromap Platen Information)

Model
VαII-50Y
VαII-50X
VαII-50K

Injection Unit

Screw Dia. mm 16 19 22 26 28 32
Theoretical Displacement cm3 14 20 35 49 61 80
Inj. Capacity Max. (PS) g 11 16 31 43 58 76
oz 0.4 0.6 1.2 1.7 2.0 2.6
Max. Inj. Press kgf/cm2 2480 1758 2732 1956 2404 1840
Max. Pack Press. kgf/cm2 2108 1494 2322 1663 2043 1564
Plasticizing Capacity PS kg/hr 11.5 19.2 29 45 51.7 72
Screw L/D Ratio   22 20 22 20 22 20.5
Standard type Inj. Rate cm3/s 60 85 114 159 185 241
Inj. Speed mm/sec 300 300 300
High speed type (Option) Inj. Rate cm3/s 100 142 190 265 308 402
Inj. Speed mm/sec 500 500 500
Screw Stroke mm 70 90 100
Screw Speed rpm 0-375 0-375 0-375
Nozzle Touch Force ton 2 2 2

Clamping Unit

Clamping Force ton 50
Max. Clamp Stroke mm 270
Min/Max Mould Height mm 150-350
Max Open Daylight mm 620
Tie-bar Distance (HxV) mm 360x310
Platen Dimensions(HxV) mm 500x470
Ejector Stroke mm 60
Max. Ejector Force ton 2

General

Machine Power Supply Capacity (Standard/High Speed) kw 7.83 / 9.83 11.1 / 18.6 15.43 / 19.43
Machine Transformer Size (Standard/High Speed) KVA 17 / 17 17 / 23 17 / 23
Machine Weight ton 2.8
Machine Dimensions (L×W×H) kVA 3589 × 1243 × 1764
Input Power Source   220 VAC ±10% 3Ph 60 ±1 Hz or 200 VAC ±10% 3Ph 50/60 Hz ±1 Hz
Model
VαII-80K
VαII-80H
VαII-100K

Injection Unit

Screw Dia. mm 28 32 32 36 28 32
Theoretical Displacement cm3 61 80 104 132 61 80
Inj. Capacity Max. (PS) g 58 76 99 125 58 76
oz 2 2.6 3.4 4.4 2 2.6
Max. Inj. Press kgf/cm2 2404 1840 2466 1948 2404 1840
Max. Pack Press. kgf/cm2 2043 1564 2097 1656 2043 1564
Plasticizing Capacity PS kg/hr 51.7 72 72 100 51.7 72
Screw L/D Ratio   22 20.5 22 20.5 22 20.5
Standard type Inj. Rate cm3/s 185 241 241 305 185 241
Inj. Speed mm/sec 300 300 300
High speed type (Option) Inj. Rate cm3/s 308 402 402 509 308 402
Inj. Speed mm/sec 500 500 500
Screw Stroke mm 100 130 100
Screw Speed rpm 0-375 0-375 0-375
Nozzle Touch Force ton 2.5 2.5 2

Clamping Unit

Clamping Force ton 80 100
Max. Clamp Stroke mm 320 360
Min/Max Mould Height mm 150-380 150-450
Max Open Daylight mm 700 810
Tie-bar Distance (HxV) mm 410x360 460x410
Platen Dimensions(HxV) mm 580x530 630x580
Ejector Stroke mm 80 80
Max. Ejector Force ton 2.5/3.3 2.5/3.3

General

Machine Power Supply Capacity (Standard/High Speed) kw 15.43 / 19.43 25.08 / 35.08 15.43 / 19.43
Machine Transformer Size (Standard/High Speed) KVA 17 / 23 33 / 43 17 / 23
Machine Weight ton 4.8 5.4
Machine Dimensions (L×W×H) kVA 4162 × 1329 × 1971 4287 × 1388 × 1971
Input Power Source   220 VAC ±10% 3Ph 60 ±1 Hz or 200 VAC ±10% 3Ph 50/60 Hz ±1 Hz
Model
VαII-100M
VαII-150M
VαII-150G

Injection Unit

Screw Dia. mm 32 36 32 36 38 40 46
Theoretical Displacement cm3 116 147 116 147 180 200 265
Inj. Capacity Max. (PS) g 110 139 110 139 171 190 250
oz 3.8 4.9 3.8 4.9 6 6.7 8.8
Max. Inj. Press kgf/cm2 2466 1948 2466 1948 2564 2314 1750
Max. Pack Press. kgf/cm2 2097 1656 2097 1656 2179 1967 1488
Plasticizing Capacity PS kg/hr 72 100 72 100 122.14 134.52 191.6
Screw L/D Ratio   22 20.5 22 20.5 21.7 20.5 18
Standard type Inj. Rate cm3/s 241 305 241 305 227 251 332
Inj. Speed mm/sec 300 300 200
High speed type (Option) Inj. Rate cm3/s 402 509 402 509 340 376.8 498
Inj. Speed mm/sec 500 500 300
Screw Stroke mm 145 145 160
Screw Speed rpm 0-375 0-375 0-375
Nozzle Touch Force ton 2.5 2.5 2.5

Clamping Unit

Clamping Force ton 100 150
Max. Clamp Stroke mm 360 400
Min/Max Mould Height mm 150-450 150-480
Max Open Daylight mm 810 880
Tie-bar Distance (HxV) mm 460x410 560x510
Platen Dimensions(HxV) mm 630x580 780x730
Ejector Stroke mm 80 100
Max. Ejector Force ton 2.5/3.3 3.3/4.5

General

Machine Power Supply Capacity (Standard/High Speed) kw 25.08 / 35.08 30.08 / 35.08 30.99 / 35.99
Machine Transformer Size (Standard/High Speed) KVA 33 / 43 33 / 43 33 / 43
Machine Weight ton 5.4 8.22
Machine Dimensions (L×W×H) kVA 4287 × 1388 × 1971 5069 × 1601 × 2114
Input Power Source   220 VAC ±10% 3Ph 60 ±1 Hz or 200 VAC ±10% 3Ph 50/60 Hz ±1 Hz
Model
VαII-200G
VαII-200F

Injection Unit

Screw Dia. mm 38 40 46 46 50 55
Theoretical Displacement cm3 180 200 265 332 392 475
Inj. Capacity Max. (PS) g 171 190 250 315 372 451
oz 6 6.7 8.8 11.1 13 15.9
Max. Inj. Press kgf/cm2 2564 2314 1750 2490 2107 1741
Max. Pack Press. kgf/cm2 2179 1967 1488 2117 1791 1480
Plasticizing Capacity PS kg/hr 122.14 134.52 191.6 199.72 244.58 307.8
Screw L/D Ratio   21.7 20.5 18 22 20.5 18
Standard type Inj. Rate cm3/s 227 251 332 332 393 475
Inj. Speed mm/sec 200 200
High speed type (Option) Inj. Rate cm3/s 340 376.8 498 498 589 712
Inj. Speed mm/sec 300 300
Screw Stroke mm 160 200
Screw Speed rpm 0-375 0-375
Nozzle Touch Force ton 3 3

Clamping Unit

Clamping Force ton 200
Max. Clamp Stroke mm 500
Min/Max Mould Height mm 200-520
Max Open Daylight mm 1020
Tie-bar Distance (HxV) mm 610x560
Platen Dimensions(HxV) mm 845x795
Ejector Stroke mm 150
Max. Ejector Force ton 3.3/4.5

General

Machine Power Supply Capacity (Standard/High Speed) kw 30.99 / 35.99 39.53 / 49.53
Machine Transformer Size (Standard/High Speed) KVA 33 / 43 43 / 54
Machine Weight ton 11.6 12.3
Machine Dimensions (L×W×H) kVA 5354 × 1582 × 2216
Input Power Source   220 VAC ±10% 3Ph 60 ±1 Hz or 200 VAC ±10% 3Ph 50/60 Hz ±1 Hz
▲VaII-200G ▲VaII-50Y ▲VaII-80K ▲VaII-100K ▲VaII-150M