Model (Euromap Platen Information) |
Vs-80S |
|||
---|---|---|---|---|
Injection Unit |
||||
Calculated Injection capacity | cm3 | 38 | 49 | |
Actual shot weight -PS | g | 36 | 46 | |
Actual shot weight | oz | 1.3 | 1.6 | |
Calculated Plasticizing Capacity - PS | g/s | 6 | 9 | |
Injection pressure-Max. | kgf/cm2 | 3012 | 2332 | |
Injection rate | cm3/sec | 67 | 86 | |
Calculated Injection speed - Max. | mm/sec | 176 | 176 | |
Screw diameter | mm | 22 | 25 | |
Screw L/D ratio | 22 | 20 | ||
Screw Speed | rpm | 400 | ||
Screw stroke | mm | 100 | ||
Nozzle stroke | mm | 200 | ||
Nozzle contact force | ton | 5 | ||
Total heating wattage | Kw | 5.25 | ||
Clamping Unit |
||||
Clamping force | ton | 80 | ||
Clamp stroke-Max. | mm | 320 | ||
Open daylight-Max. | mm | 670 | ||
Mold thickness Min.-Max. | mm | 150-350 | ||
Platen dimensions(HxV) | mm | 540x510 | ||
Tie-Bar distance(HxV) | mm | 360x360 | ||
Ejector stroke | mm | 80 | ||
Ejector force | ton | 4 | ||
General |
||||
Motor (Standard) | HP(Kw) | 25(18.5) | ||
Servo motor (ES Option) | Kw | 15 | ||
Oil tank capacity | L | 165 | ||
Hydraulic sys. Pressure | Kg/cm2 | 170 | ||
Machine weight | ton | 3.3 | ||
Machine size (LxWxH) | mm | 3900x1135x1900 | ||
Machine size (LxWxH) ES | mm | 4230x1135x1900 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model (SPI Platen Information) |
Vs-80S |
|||
---|---|---|---|---|
Injection Unit | ||||
Calculated Injection capacity | in3 | 2.3 | 2.9 | |
Actual shot weight -PS | g | 36 | 46 | |
Actual shot weight | oz | 1.3 | 1.6 | |
Calculated Plasticizing Capacity - PS | g/s | 6 | 9 | |
Injection pressure-Max. | Psi | 42839 | 33168 | |
Injection rate | in3/sec | 4 | 5.2 | |
Calculated Injection speed - Max. | in/sec | 6.9 | 6.9 | |
Screw diameter | in | 0.86 | 0.98 | |
Screw L/D ratio | 22 | 20 | ||
Screw Speed | rpm | 400 | ||
Screw stroke | in | 3.93 | ||
Nozzle stroke | in | 7.87 | ||
Nozzle contact force | U.S. ton | 5.5 | ||
Total heating wattage | Kw | 5.25 | ||
Clamping Unit | ||||
Clamping force | U.S. ton | 88 | ||
Clamp stroke-Max. | in | 12.59 | ||
Open daylight-Max. | in | 26.37 | ||
Mold thickness Min.-Max. | in | 5.9 - 13.77 | ||
Platen dimensions(HxV) | in | 21.25 x 20.07 | ||
Tie-Bar distance(HxV) | in | 14.17 x 14.17 | ||
Ejector stroke | in | 3.14 | ||
Ejector force | U.S. ton | 4.4 | ||
General | ||||
Motor (Standard) | HP(Kw) | 25(18.5) | ||
Servo motor (ES Option) | Kw | 15 | ||
Oil tank capacity | L | 165 | ||
Hydraulic sys. Pressure | Kg/in2 | 2417 | ||
Machine weight | U.S. ton | 3.63 | ||
Machine size (LxWxH) | in | 154x45x75 | ||
Machine size (LxWxH) ES | in | 167x45x75 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |