Model (Euromap Platen Information) |
Vs-80K |
|||
|---|---|---|---|---|
Injection Unit |
||||
| Calculated Injection capacity | cm3 | 62 | 80 | 102 |
| Actual shot weight -PS | g | 58 | 75 | 95 |
| Actual shot weight | oz | 2 | 2.7 | 3.4 |
| Calculated Plasticizing Capacity - PS | g/s | 12 | 18 | 24 |
| Injection pressure-Max. | kgf/cm2 | 2634 | 2017 | 1594 |
| Injection rate | cm3/sec | 109 | 142 | 179 |
| Calculated Injection speed - Max. | mm/sec | 176 | 176 | 176 |
| Screw diameter | mm | 28 | 32 | 36 |
| Screw L/D ratio | 23 | 20 | 18 | |
| Screw Speed | rpm | 375 | ||
| Screw stroke | mm | 100 | ||
| Nozzle stroke | mm | 245 | ||
| Nozzle contact force | ton | 5 | ||
| Total heating wattage | Kw | 5.8 | ||
Clamping Unit |
||||
| Clamping force | ton | 80 | ||
| Clamp stroke-Max. | mm | 320 | ||
| Open daylight-Max. | mm | 670 | ||
| Mold thickness Min.-Max. | mm | 150-350 | ||
| Platen dimensions(HxV) | mm | 540x510 | ||
| Tie-Bar distance(HxV) | mm | 360x360 | ||
| Ejector stroke | mm | 80 | ||
| Ejector force | ton | 4 | ||
General |
||||
| Motor (Standard) | HP(Kw) | 25(18.5) | ||
| Servo motor (ES Option) | Kw | 15 | ||
| Oil tank capacity | L | 165 | ||
| Hydraulic sys. Pressure | Kg/cm2 | 170 | ||
| Machine weight | ton | 3.3 | ||
| Machine size (LxWxH) | mm | 3900 x 1135 x 1900 | ||
| Machine size (LxWxH) ES | mm | 4230 x 1135 x 1900 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. | ||||
Model (SPI Platen Information) |
Vs-80K |
|||
|---|---|---|---|---|
| Injection Unit | ||||
| Calculated Injection capacity | in3 | 3.7 | 4.8 | 6.2 |
| Actual shot weight -PS | g | 58 | 75 | 95 |
| Actual shot weight | oz | 2 | 2.7 | 3.4 |
| Calculated Plasticizing Capacity - PS | g/s | 12 | 18 | 24 |
| Injection pressure-Max. | Psi | 37463 | 28687 | 22671 |
| Injection rate | in3/sec | 6.6 | 8.6 | 10.9 |
| Calculated Injection speed - Max. | in/sec | 6.9 | 6.9 | 6.9 |
| Screw diameter | in | 1.1 | 1.25 | 1.41 |
| Screw L/D ratio | 23 | 20 | 18 | |
| Screw Speed | rpm | 375 | ||
| Screw stroke | in | 3.93 | ||
| Nozzle stroke | in | 9.64 | ||
| Nozzle contact force | U.S. ton | 5.5 | ||
| Total heating wattage | Kw | 5.8 | ||
| Clamping Unit | ||||
| Clamping force | U.S. ton | 88 | ||
| Clamp stroke-Max. | in | 12.59 | ||
| Open daylight-Max. | in | 26.37 | ||
| Mold thickness Min.-Max. | in | 5.9 - 13.77 | ||
| Platen dimensions(HxV) | in | 21.25 x 20.07 | ||
| Tie-Bar distance(HxV) | in | 14.17 x 14.17 | ||
| Ejector stroke | in | 3.14 | ||
| Ejector force | U.S. ton | 4.4 | ||
| General | ||||
| Motor (Standard) | HP(Kw) | 25(18.5) | ||
| Servo motor (ES Option) | Kw | 15 | ||
| Oil tank capacity | L | 165 | ||
| Hydraulic sys. Pressure | Kg/in2 | 2417 | ||
| Machine weight | U.S. ton | 3.63 | ||
| Machine size (LxWxH) | in | 154x45x75 | ||
| Machine size (LxWxH) ES | in | 167x45x75 | ||
| ※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. | ||||
