Model (Euromap Platen Information) |
Vs-50S |
|||
---|---|---|---|---|
Injection Unit |
||||
Calculated Injection capacity | cm3 | 38 | 49 | |
Actual shot weight -PS | g | 36 | 46 | |
Actual shot weight | oz | 1.3 | 1.6 | |
Calculated Plasticizing Capacity - PS | g/s | 6 | 9 | |
Injection pressure-Max. | kgf/cm2 | 3012 | 2332 | |
Injection rate | cm3/sec | 52 | 68 | |
Calculated Injection speed - Max. | mm/sec | 137 | 137 | |
Screw diameter | mm | 22 | 25 | |
Screw L/D ratio | 22 | 20 | ||
Screw Speed | rpm | 400 | ||
Screw stroke | mm | 100 | ||
Nozzle stroke | mm | 200 | ||
Nozzle contact force | ton | 5 | ||
Total heating wattage | Kw | 5.25 | ||
Clamping Unit |
||||
Clamping force | ton | 50 | ||
Clamp stroke-Max. | mm | 270 | ||
Open daylight-Max. | mm | 590 | ||
Mold thickness Min.-Max. | mm | 150-320 | ||
Platen dimensions(HxV) | mm | 446x446 | ||
Tie-Bar distance(HxV) | mm | 310x310 | ||
Ejector stroke | mm | 60 | ||
Ejector force | ton | 3.3 | ||
General |
||||
Motor (Standard) | HP(Kw) | 20(15) | ||
Servo motor (ES Option) | Kw | 11 | ||
Oil tank capacity | L | 150 | ||
Hydraulic sys. Pressure | Kg/cm2 | 170 | ||
Machine weight | ton | 2.8 | ||
Machine size (LxWxH) | mm | 3700x1090x1900 | ||
Machine size (LxWxH) ES | mm | 4030x1090x1900 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model (SPI Platen Information) |
Vs-50S |
|||
---|---|---|---|---|
Injection Unit | ||||
Calculated Injection capacity | in3 | 2.3 | 2.9 | |
Actual shot weight -PS | g | 36 | 46 | |
Actual shot weight | oz | 1.3 | 1.6 | |
Calculated Plasticizing Capacity - PS | g/s | 6 | 9 | |
Injection pressure-Max. | Psi | 42839 | 33168 | |
Injection rate | in3/sec | 3.1 | 4.1 | |
Calculated Injection speed - Max. | in/sec | 5.39 | 5.39 | |
Screw diameter | in | 0.86 | 0.98 | |
Screw L/D ratio | 22 | 20 | ||
Screw Speed | rpm | 400 | ||
Screw stroke | in | 3.93 | ||
Nozzle stroke | in | 7.87 | ||
Nozzle contact force | U.S. ton | 5.5 | ||
Total heating wattage | Kw | 5.25 | ||
Clamping Unit | ||||
Clamping force | U.S. ton | 55 | ||
Clamp stroke-Max. | in | 10.62 | ||
Open daylight-Max. | in | 23.22 | ||
Mold thickness Min.-Max. | in | 5.9 - 12.59 | ||
Platen dimensions(HxV) | in | 17.55 x 17.55 | ||
Tie-Bar distance(HxV) | in | 12.2 x 12.2 | ||
Ejector stroke | in | 2.36 | ||
Ejector force | U.S. ton | 3.6 | ||
General | ||||
Motor (Standard) | HP(Kw) | 20(15) | ||
Servo motor (ES Option) | Kw | 11 | ||
Oil tank capacity | L | 150 | ||
Hydraulic sys. Pressure | Kg/in2 | 2417 | ||
Machine weight | U.S. ton | 3.08 | ||
Machine size (LxWxH) | in | 145x43x75 | ||
Machine size (LxWxH) ES | in | 159x43x75 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |