Model (Euromap Platen Information) |
Vs-250F |
|||
---|---|---|---|---|
Injection Unit |
||||
Calculated Injection capacity | cm3 | 332 | 393 | 475 |
Actual shot weight -PS | g | 312 | 368 | 445 |
Actual shot weight | oz | 11 | 13 | 15.7 |
Calculated Plasticizing Capacity - PS | g/s | 37 | 46 | 58 |
Injection pressure-Max. | kgf/cm2 | 2250 | 1904 | 1574 |
Injection rate | cm3/sec | 238 | 281 | 341 |
Calculated Injection speed - Max. | mm/sec | 153 | 153 | 153 |
Screw diameter | mm | 46 | 50 | 55 |
Screw L/D ratio | 22 | 20 | 18 | |
Screw Speed | rpm | 340 | ||
Screw stroke | mm | 200 | ||
Nozzle stroke | mm | 380 | ||
Nozzle contact force | ton | 5 | ||
Total heating wattage | Kw | 12.9 | ||
Clamping Unit |
||||
Clamping force | ton | 250 | ||
Clamp stroke-Max. | mm | 580 | ||
Open daylight-Max. | mm | 1130 | ||
Mold thickness Min.-Max. | mm | 250-550 | ||
Platen dimensions(HxV) | mm | 820x820 | ||
Tie-Bar distance(HxV) | mm | 610x610 | ||
Ejector stroke | mm | 170 | ||
Ejector force | ton | 8.5 | ||
General |
||||
Motor (Standard) | HP(Kw) | 50(37.0) | ||
Servo motor (ES Option) | Kw | 15 + 15 | ||
Oil tank capacity | L | 450 | ||
Hydraulic sys. Pressure | Kg/cm2 | 170 | ||
Machine weight | ton | 9.9 | ||
Machine size (LxWxH) | mm | 6850 x 1660 x 2210 | ||
Machine size (LxWxH) ES | mm | 7290 x 1660 x 2210 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model (SPI Platen Information) |
Vs-250F |
|||
---|---|---|---|---|
Injection Unit | ||||
Calculated Injection capacity | in3 | 20.2 | 23.9 | 28.9 |
Actual shot weight -PS | g | 312 | 368 | 445 |
Actual shot weight | oz | 11 | 13 | 15.7 |
Calculated Plasticizing Capacity - PS | g/s | 37 | 46 | 58 |
Injection pressure-Max. | Psi | 32001 | 27080 | 22387 |
Injection rate | in3/sec | 14.5 | 17.1 | 20.8 |
Calculated Injection speed - Max. | in/sec | 6.02 | 6.02 | 6.02 |
Screw diameter | in | 1.81 | 1.96 | 2.16 |
Screw L/D ratio | 22 | 20 | 18 | |
Screw Speed | rpm | 340 | ||
Screw stroke | in | 7.87 | ||
Nozzle stroke | in | 14.96 | ||
Nozzle contact force | U.S. ton | 5.5 | ||
Total heating wattage | Kw | 12.9 | ||
Clamping Unit | ||||
Clamping force | U.S. ton | 275 | ||
Clamp stroke-Max. | in | 22.83 | ||
Open daylight-Max. | in | 44.48 | ||
Mold thickness Min.-Max. | in | 9.84 - 21.65 | ||
Platen dimensions(HxV) | in | 32.28 x 32.28 | ||
Tie-Bar distance(HxV) | in | 24.01 x 24.01 | ||
Ejector stroke | in | 6.69 | ||
Ejector force | U.S. ton | 9.3 | ||
General | ||||
Motor (Standard) | HP(Kw) | 50(37.0) | ||
Servo motor (ES Option) | Kw | 15 + 15 | ||
Oil tank capacity | L | 450 | ||
Hydraulic sys. Pressure | Kg/in2 | 2417 | ||
Machine weight | U.S. ton | 10.9 | ||
Machine size (LxWxH) | in | 270x65x87 | ||
Machine size (LxWxH) ES | in | 287x65x87 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |