Model (Euromap Platen Information) |
Vs-180G |
|||
---|---|---|---|---|
Injection Unit |
||||
Calculated Injection capacity | cm3 | 181 | 121 | 266 |
Actual shot weight -PS | g | 170 | 188 | 249 |
Actual shot weight | oz | 6 | 6.7 | 8.8 |
Calculated Plasticizing Capacity - PS | g/s | 25 | 29 | 43 |
Injection pressure-Max. | kgf/cm2 | 2179 | 1967 | 1487 |
Injection rate | cm3/sec | 201 | 222 | 294 |
Calculated Injection speed - Max. | mm/sec | 177 | 177 | 177 |
Screw diameter | mm | 38 | 40 | 46 |
Screw L/D ratio | 21 | 20 | 17.5 | |
Screw Speed | rpm | 364 | ||
Screw stroke | mm | 160 | ||
Nozzle stroke | mm | 340 | ||
Nozzle contact force | ton | 5 | ||
Total heating wattage | Kw | 8.02 | ||
Clamping Unit |
||||
Clamping force | ton | 180 | ||
Clamp stroke-Max. | mm | 470 | ||
Open daylight-Max. | mm | 970 | ||
Mold thickness Min.-Max. | mm | 200-500 | ||
Platen dimensions(HxV) | mm | 720x720 | ||
Tie-Bar distance(HxV) | mm | 510x510 | ||
Ejector stroke | mm | 140 | ||
Ejector force | ton | 5.6 | ||
General |
||||
Motor (Standard) | HP(Kw) | 40(30) | ||
Servo motor (ES Option) | Kw | 22 | ||
Oil tank capacity | L | 245 | ||
Hydraulic sys. Pressure | Kg/cm2 | 170 | ||
Machine weight | ton | 5.9 | ||
Machine size (LxWxH) | mm | 5400 x 1180 x 2050 | ||
Machine size (LxWxH) ES | mm | 5780 x 1180 x 2050 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |
Model (SPI Platen Information) |
Vs-180G |
|||
---|---|---|---|---|
Injection Unit | ||||
Calculated Injection capacity | in3 | 11 | 12.2 | 16.2 |
Actual shot weight -PS | g | 170 | 188 | 249 |
Actual shot weight | oz | 6 | 6.7 | 8.8 |
Calculated Plasticizing Capacity - PS | g/s | 20 | 23 | 33 |
Injection pressure-Max. | Psi | 30991 | 27976 | 21149 |
Injection rate | in3/sec | 9.5 | 10.5 | 13.9 |
Calculated Injection speed - Max. | in/sec | 5.39 | 5.39 | 5.39 |
Screw diameter | in | 1.49 | 1.57 | 1.81 |
Screw L/D ratio | 21 | 20 | 17.5 | |
Screw Speed | rpm | 283 | ||
Screw stroke | in | 6.29 | ||
Nozzle stroke | in | 13.38 | ||
Nozzle contact force | U.S. ton | 5.5 | ||
Total heating wattage | Kw | 8.02 | ||
Clamping Unit | ||||
Clamping force | U.S. ton | 198 | ||
Clamp stroke-Max. | in | 18.5 | ||
Open daylight-Max. | in | 38.18 | ||
Mold thickness Min.-Max. | in | 7.87 - 19.68 | ||
Platen dimensions(HxV) | in | 28.34 x 28.34 | ||
Tie-Bar distance(HxV) | in | 20.07 x 20.07 | ||
Ejector stroke | in | 5.51 | ||
Ejector force | U.S. ton | 6.1 | ||
General | ||||
Motor (Standard) | HP(Kw) | 40(30) | ||
Servo motor (ES Option) | Kw | 22 | ||
Oil tank capacity | L | 245 | ||
Hydraulic sys. Pressure | Kg/in2 | 2417 | ||
Machine weight | U.S. ton | 6.5 | ||
Machine size (LxWxH) | in | 212x47x80 | ||
Machine size (LxWxH) ES | in | 227x47x80 | ||
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. |